prof. dr Mladen Todic
redovni profesor
Nastavnik - II-4
Faculty of Mechanical Engineering
051/433-095
Courses
Mašinski fakultet Tehnološki fakultetBibliography
Journal papers
Deformation state of the load-bearing structure of a four-column the press
| DOI | 10.1088/1742-6596/2540/1/012030 |
|---|---|
| Journal | Journal of physics. Conference series (Print) |
| Year | 2023 |
| Authors | Mladen Todić, Valentina Golubović Bugarski, Mirsad Merdanić, and Tihomir Latinović |
| Volumen | 2540 |
| Number | 012030 |
Investigation of dynamic behaviour of one complex steel structure
| DOI | 10.1088/1742-6596/2540/1/012028 |
|---|---|
| Journal | Journal of physics. Conference series (Print) |
| Year | 2023 |
| Authors | Valentina Golubović Bugarski, Branislav Sredanović, Snježana Milovanović, Radovan Vukomanović, Mladen Todić, and Snežana Petković |
| Volumen | 2540 |
| Number | 1 |
| Page from | 012028 |
| Web address | https://iopscience.iop.org/article/10.1088/1742-6596/2540/1/012028/pdf |
Harmfulness during technical inspection of road vehicles
| DOI | 10.1088/1742-6596/2540/1/012029 |
|---|---|
| Journal | Journal of physics. Conference series (Print) |
| Year | 2023 |
| Authors | Mladen Todić, Snežana Petković, and Biljana Vranješ |
| Volumen | 2540 |
| Number | 012029 |
The requirements for the design and construction of a gas cylinders aimed for transportation of a of compressed and liquefied gases
| DOI | 10.1088/1742-6596/1781/1/012036 |
|---|---|
| Journal | Journal of Physics: Conference Series |
| Year | 2021 |
| Authors | Valentina Golubović Bugarski, Mladen Todić, Snežana Petković, and Gordana Globočki Lakić |
| Volumen | 1781 |
| Page from | 1 |
| Page to | 10 |
| Web address | https://iopscience.iop.org/article/10.1088/1742-6596/1781/1/012036 |
Optimizing the Management of the Occupational Safety and Health System in "ArcelorMittal" Prijedor on the Basis of Performance Indicators
| DOI | 10.17559/TV-20190320154104 |
|---|---|
| Journal | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
| Year | 2020 |
| Authors | Biljana Vranješ, Mladen Todić, and Valentina Golubović Bugarski |
| Volumen | 27 |
| Number | 3 |
| Page from | 744 |
| Page to | 750 |
A Comparative Analysis of the Occupational Safety and Health System in Production System
| DOI | 10.5937/tehnika1903461V |
|---|---|
| Journal | TEHNIKA |
| Year | 2019 |
| Authors | Biljana Vranješ and Mladen Todić |
| Volumen | 19 |
| Number | 3 |
| Page from | 461 |
| Page to | 468 |
A MODEL OF ANALYSIS OF THE OCCUPATIONAL SAFETY AND HEALTH SYSTEM IN THE PRODUCTION SYSTEM
| DOI | 10.5937/jaes17-21372 |
|---|---|
| Journal | Istraživanja i projektovanja za privredu |
| Year | 2019 |
| Authors | Biljana Vranješ and Mladen Todić |
| Volumen | 17 |
| Number | 3 |
| Page from | 264 |
| Page to | 272 |
Security of bottle to fill in high pressure air
| DOI | 10.1088/1757-899X/294/1/012085 |
|---|---|
| Journal | International Conference on Innovative Ideas in Science (Online) |
| Year | 2018 |
| Authors | Mladen Todić, Tihomir Latinović, Valentina Golubović Bugarski, and Aleksandar Majstorović |
| Volumen | 294 |
| Number | 012085 |
| Page from | 1 |
| Page to | 6 |
| Web address | https://iopscience.iop.org/article/10.1088/1757-899X/294/1/012085 |
STRATEGY FOR EFFECTIVE MEASUREMENT OF HAND TRANSMITTED VIBRATION AT THE WORKPLACE
| DOI | DOI: 10.22190/FUWLEP1701061G |
|---|---|
| Journal | Facta Universitatis, Series: Working and Living Environmental Protection |
| Year | 2017 |
| Authors | Valentina Golubović Bugarski, Mladen Todić, and Biljana Vranješ |
| Volumen | 14 |
| Number | 1 |
| Page from | 61 |
| Page to | 74 |
| Web address | http://casopisi.junis.ni.ac.rs/index.php/FUWorkLivEnvProt/issue/view/590 |
Safety of the shaft-wheel assembly of electric locomotives
| DOI | doi:10.1088/1757-899X/200/1/012024 |
|---|---|
| Journal | International Conference on Innovative Ideas in Science (Online) |
| Year | 2017 |
| Authors | Mladen Todić and Valentina Golubović Bugarski |
| Volumen | 200 |
| Number | 1 |
| Page from | 1 |
| Page to | 6 |
| Web address | http://iopscience.iop.org/article/10.1088/1757-899X/200/1/012024/meta |
ELASTIC STRAIN TEST FRAME OF PROCESSING SYSTEM FOR PROFILING SHEET METAL BY ROLLERS
| Journal | Annals of Faculty Engineering Hunedoara - International Journal of Engineering |
|---|---|
| Year | 2014 |
| Authors | Asim Jušić, Nijaz Hasanagić, Milan Jurković, and Mladen Todić |
| Page from | 207 |
| Page to | 210 |
| Web address | http://annals.fih.upt.ro |
DEFORMATION ZONES AT TWO‐LAYER BENDING COMPOSITES
| Journal | Annals of Faculty Engineering Hunedoara - International Journal of Engineering |
|---|---|
| Year | 2014 |
| Authors | Mladen Todić and Ostoja Miletić |
| Volumen | Tome XII (2014) |
| Page from | 147 |
| Page to | 150 |
DEPENDENCE OF DEFORMATION FROM PARAMETERS OF PROFILING PROCESS
| Journal | Journal of production engineering |
|---|---|
| Year | 2010 |
| Authors | Ostoja Miletić and Mladen Todić |
| Volumen | 13 |
| Page from | 7 |
| Page to | 10 |
POSITION OF NEUTRAL AREAS OF INTENSITY OF STRESS AND DEFORMATIONS AT TWO LAYER COMPOSITE MATERIALS
| Journal | Journal for technology of plasticity |
|---|---|
| Year | 2005 |
| Authors | Mladen Todić, Ostoja Miletić, and Milentije Stefanović |
| Volumen | Volume 30 (2005) |
| Page from | 109 |
| Page to | 118 |
Conference papers
An analysis of human hand-arm vibrations on the example of workers' exposure to vibrations in one production company
| Scientific Conference | 17 International Conference on th Accomplishments in Mechanical and Industrial Engineering - DEMI 2025 |
|---|---|
| Publikacija | Proceedings |
| Year | 2025 |
| Authors | Edin Ridžal, Valentina Golubović Bugarski, Biljana Vranješ, Gordana Globočki Lakić, and Mladen Todić |
| Page from | 609 |
| Page to | 618 |
Analysis of the Causes of Accidents on Means of Work in a Mining Company – A Case Study
| Scientific Conference | 17 International Conference on th Accomplishments in Mechanical and Industrial Engineering - DEMI 2025 |
|---|---|
| Publikacija | Proceedings |
| Year | 2025 |
| Authors | Biljana Vranješ, Dejan Branković, Zdravko Milovanović, Mladen Todić, Mile Vajkić, and Ljubica Figun |
| Page from | 619 |
| Page to | 623 |
BEZBJEDNOST KORIŠTENJA IZVORA TOPLOTE IZ ČVRSTIH I GASOVITIH GORIVA
| Scientific Conference | 9. naučno - stručni skup sa međunarodnim učešćem Tehnološke inovacije generator privrednog razvoja |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2024 |
| Authors | Mladen Todić, Tihomir Latinović, Snežana Petković, Biljana Vranješ, Valentina Golubović Bugarski, Ostoja Miletić, and Ljilja Šikman |
| Page from | 38 |
| Page to | 49 |
SAKUPLJANJE OBNOVLJIVE ENERGIJE: ELIMINISANJE BATERIJA U BEŽIČNIM SENZORSKIM MREŽAMA I IOT UREĐAJIMA
| Scientific Conference | 9. naučno - stručni skup sa međunarodnim učešćem Tehnološke inovacije generator privrednog razvoja |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2024 |
| Authors | Tihomir Latinović, Mladen Todić, Mirko Dobrnjac, Biljana Vranješ, and Ljilja Šikman |
| Page from | 13 |
| Page to | 24 |
SAFE USE OF LPG FROM MOBILE BOTTLES
| Scientific Conference | 20th International Conference "Man and Working Environment" Safety Engineering & Management, Science - Industry - Education |
|---|---|
| Publikacija | Conference Proceedings |
| Year | 2023 |
| Authors | Mladen Todić, Snežana Petković, Biljana Vranješ, Valentina Golubović Bugarski, and Aleksandar Majstorović |
| Page from | 75 |
| Page to | 80 |
| Web address | www.znrfak.ni.ac.rs/semsie |
RELIABILITY OF INSULATION DEVICES
| Scientific Conference | 8th International Professional and Scientific Conference OCCUPATIONAL SAFETY AND HEALTH |
|---|---|
| Publikacija | Book of Proceedings |
| Year | 2022 |
| Authors | Mladen Todić, Snežana Petković, and Biljana Vranješ |
| Page from | 950 |
| Page to | 956 |
MOBILNE PLINSKE BOCE - INOVACIJE U PROIZVODNJI
| Scientific Conference | 8. naučno - stručni skup sa međunarodnim učešćem Tehnološke inovacije generator privrednog razvoja |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2022 |
| Authors | Mladen Todić, Snežana Petković, Biljana Vranješ, and Mirko Dobrnjac |
| Page from | 33 |
| Page to | 45 |
Investigation of dynamic behaviour of one complex steel structure
| Scientific Conference | International Conference on Applied Science, ICAS 2022 |
|---|---|
| Year | 2022 |
| Authors | Valentina Golubović Bugarski, Branislav Sredanović, Snježana Milovanović, Radovan Vukomanović, Snežana Petković, and Mladen Todić |
RELIABILITY AND SAFETY OF AXLE-WHEEL ASSEMBLY
| Scientific Conference | XIX scientific-expert conference on railways, railcon 20, |
|---|---|
| Publikacija | XIX scientific-expert conference on railways, railcon 20, |
| Year | 2020 |
| Authors | Mladen Todić |
| Page from | 97 |
| Page to | 100 |
ZONE OF THE STRESS AND OF THE STRAINS WHEN BENDING LAMINARY COMPOSITES
| Scientific Conference | 14th International Conference on Accomplishments in machanical and Industrial Engineering, DEMI 2019 |
|---|---|
| Publikacija | DEMI 2019 |
| Year | 2019 |
| Authors | Mladen Todić, Ostoja Miletić, and Said Pašalić |
| Page from | 89 |
| Page to | 96 |
INJURIES TREND AS AN INDICATOR OF OCCUPATIONAL SAFETY AND HEALTH
| Scientific Conference | 14th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2019 |
|---|---|
| Publikacija | PROCEEDINGS |
| Year | 2019 |
| Authors | Biljana Vranješ, Mile Vajkić, Branko Lazić, and Mladen Todić |
| Page from | 631 |
| Page to | ‚639 |
THE EFFECT OF CONTACT SURFACES ON ENERGY PARAMETERS OF PROCESS PROFILING
| Scientific Conference | 14th International Conference on Accomplisments in Macahnical and Industrial Engineering, DEMI 2019 |
|---|---|
| Year | 2019 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 81 |
| Page to | 87 |
The requirements for the design and construction of a gas cylinders aimed for transportation of a of compressed and liquefied gases
| Scientific Conference | International Conference on Applied Science, ICAS 2020 |
|---|---|
| Year | 2019 |
| Authors | Valentina Golubović Bugarski, Mladen Todić, Snežana Petković, and Gordana Globočki Lakić |
POŽARI NA MOTORNIM VOZILIMA I SAOBRAĆAJNE NEZGODE KAO FAKTORI U BEZBJEDNOSTI SAOBRAĆAJA
| Scientific Conference | DRUGA MEĐUNARODNA KONFERENCIJA Ekonomski, pravni, sigurnosni, prometni i sportski aspekti menadžmenta "MASTA 2019" |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2019 |
| Authors | Aleksandar Majstorović, Biljana Vranješ, Valentina Golubović Bugarski, Mladen Todić, and Tihomir Latinović |
| Page from | 73 |
| Page to | 87 |
Drawning force of the osmometric full profiles
| Scientific Conference | International Conference on Applied Science, ICAS, 2019 |
|---|---|
| Year | 2019 |
| Authors | Mladen Todić, Tihomir Latinović, Valentina Golubović Bugarski, Ostoja Miletić, and Gordana Globočki Lakić |
IMPROVING PREVENTIVE MEASURES FOR FIRE FIGHTING IN INDUSTRIAL SYSTEMS IN B&H
| Scientific Conference | The 18th Conference of the series Man and Working Enviroment- INTERNATIONAL CONFERENCE 50 YEARS OF HIGHER EDUCATION, SCIENCE AND RESEARCH IN OCCUPATIONAL SAFETY ENGINEERING |
|---|---|
| Publikacija | PROCEEDINGS |
| Year | 2018 |
| Authors | Mile Vajkić, Biljana Vranješ, and Mladen Todić |
| Page from | 47 |
| Page to | 51 |
| Web address | www.znrfak.ni.ac.rs |
SECURITY APPLICATIONS OF INSULATION MASK
| Scientific Conference | 13th International Conference on Accomplishments in Mechanical and Industrial Engineering |
|---|---|
| Year | 2017 |
| Authors | Mladen Todić, Tihomir Latinović, Biljana Vranješ, and Aleksandar Majstorović |
| Page from | 841 |
| Page to | 846 |
Data recording systems with teloc-1500 for upgradings safety systems on locomotive series 441-521
| Scientific Conference | International Conference on Accomplishments in Mechanical and Industrial Engineering |
|---|---|
| Publikacija | 13th International Conference on Accomplishments in Mechanical and Industrial Engineering |
| Year | 2017 |
| Authors | Tihomir Latinović, Mladen Todić, Cristian Barz, Adina Pop Vadean, and Petrica Pop Pauel |
| Page from | 669 |
| Page to | 667 |
The heat distribution at compression filing of bottles and expansion of medical air
| Scientific Conference | International Conference on Accomplishments in Mechanical and Industrial Engineering |
|---|---|
| Publikacija | 13th International Conference on Accomplishments in Mechanical and Industrial Engineering |
| Year | 2017 |
| Authors | Aleksandar Majstorović and Mladen Todić |
| Page from | 863 |
| Page to | 867 |
Calibration test work and nonlinear stiffness of the pulling and buffer devices for rolling stock
| Scientific Conference | „NEW TECHNOLOGIES NT-2016” |
|---|---|
| Publikacija | Proceedings "New Technologies" Development and application |
| Year | 2016 |
| Authors | Drago Blagojević, Mladen Todić, Valentina Golubović Bugarski, and Radomir Cvijić |
| Page from | 141 |
| Page to | 146 |
Strategy for effective measurement of hand transmitted vibration at the workplace
| Scientific Conference | 25th International Conference on NOISE and VIBRATION |
|---|---|
| Year | 2016 |
| Authors | Valentina Golubović Bugarski, Mladen Todić, and Biljana Vranješ |
Sistem upravqawa radom spojnice krivajne prese
| Scientific Conference | IX Me|unarodna stručna konferencija MMA2006 fleksibilne tehnologije |
|---|---|
| Year | 2016 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 165 |
| Page to | 166 |
MOVEMENT AND MOVING SPEED EDGE OF THE CORNICE CIRCLES BLANK OF THE WORKPIECE IN DEEP DRAWING
| Scientific Conference | 12TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN ELECTRICAL AND MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY |
|---|---|
| Publikacija | Procedings |
| Year | 2015 |
| Authors | Said Pašalić, Milan Jurković, and Mladen Todić |
| Page from | 169 |
| Page to | 174 |
Lebdeće čestice u prostoru pregleda vozila
| Scientific Conference | Stručni skup - Tehnički pregled vozila Republike Srpske 2015 |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2015 |
| Authors | Mladen Todić, Snežana Petković, and Borislav Malinović |
| Page from | 146 |
| Page to | 154 |
ZONE OF DEFORMATION AT MULTI-LAYER MATERIALS
| Scientific Conference | 12TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN ELECTRICAL AND MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY |
|---|---|
| Publikacija | Proceedings |
| Year | 2015 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 91 |
| Page to | 96 |
STRESS-STRAIN STATE IN PROFILING ANISOTROPIC STRIPS
| Scientific Conference | 12TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN ELECTRICAL AND MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY |
|---|---|
| Publikacija | Procedings |
| Year | 2015 |
| Authors | Ostoja Miletić and Mladen Todić |
| Page from | 269 |
| Page to | 274 |
ZONE OF DEFORMATION AT MULTI-LAYER MATERIALS
| Scientific Conference | Internacional Conference on Accomplisments in Eletrical and mechanical Engineering and Information technology |
|---|---|
| Publikacija | DEMI 2015 |
| Year | 2015 |
| Authors | Mladen Todić |
| Page from | 91 |
| Page to | 96 |
Štetnosti u zoni tehničkog pregleda
| Scientific Conference | Stručni skup - Tehnički pregledi vozila Republike Srpske 2014 |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2014 |
| Authors | Mladen Todić, Snežana Petković, and Borislav Malinović |
| Page from | 89 |
| Page to | 97 |
DESIGNING TRANSDUCERS FOR MEASUREMENT OF FORCE IN SHEET METAL FORMING PROCES BY MEANS OF ROLLERS
| Scientific Conference | International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technologz DEMI 2013 |
|---|---|
| Year | 2013 |
| Authors | Nijaz Hasanagić, Asim Jušić, Milan Jurković, and Mladen Todić |
| Page from | 115 |
| Page to | 120 |
DEFORMATION ZONES AT TWO-LAYER BENDING COMPOSITES
| Scientific Conference | International conference on accomplishment in electrical and mechanical engineering an information technologz, DEMI 2013 |
|---|---|
| Year | 2013 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 403 |
| Page to | 408 |
ELASTIC STRAIN TEST FRAME OF PROCESSING SYSTEM FOR PROFILING SHEET METAL BY ROLLERS
| Scientific Conference | Abstract: Stress-strain zone at bending of single-materials has nemonoton character. On the intensity and impact zone propagation affect have: kinematic processes, the history of deformation, geometrical parameters of tool, geometrical parameters of the work piece and others. All these parameters affect the reliability of the process and make it complicated. However, if the process of bending with layered composite materials becomes complex, also the reliability of its policies must be defined t |
|---|---|
| Year | 2013 |
| Authors | Asim Jušić, Nijaz Hasanagić, Milan Jurković, and Mladen Todić |
| Page from | 423 |
| Page to | 428 |
STRESS STATE OF RAIL VEHICLE WHEEL RIM IN EXPLOATATION
| Scientific Conference | INTERNATIONAL conference on accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013 |
|---|---|
| Year | 2013 |
| Authors | Drago Blagojević, Mladen Todić, and Valentina Golubović Bugarski |
| Page from | 221 |
| Page to | 230 |
Stress state of rail vehicle wheel rim in exploatation
| Scientific Conference | DEMI 2013 - 11th International conference on accomplishment in electrical and mechanical engineering an information technology |
|---|---|
| Publikacija | DEMI 2013, Banjaluka |
| Year | 2013 |
| Authors | Drago Blagojević, Mladen Todić, and Valentina Golubović Bugarski |
| Page from | 221 |
| Page to | 229 |
Definition and Investigation of Operation and Nonlinear Stiffness of Pulling and Buffer Devices for Load and Relaxation Process
| Scientific Conference | International Congress of Serbian Society of Mechanics |
|---|---|
| Publikacija | International Congress of Serbian Society of Mechanics |
| Year | 2013 |
| Authors | Drago Blagojević, Mladen Todić, Ostoja Miletić, and Valentina Golubović Bugarski |
| Page from | 699 |
| Page to | 705 |
| Web address | www.ssm.org.rs |
MEHANIČKE OSOBINE KOMPOZITA SA DVA SLOJA
| Scientific Conference | SAVREMENI MATERIJALI |
|---|---|
| Publikacija | SAVREMENI MATERIJALI, knjiga XIX |
| Year | 2011 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 337 |
| Page to | 348 |
CHANGING THE WALL THICKNESS PROFILE IN THE PROCESS OF PROFILING
| Scientific Conference | PROCEEDINGS OF THE 10th ANNIVERSARY INTERNATIONAL CONFERENCE ON ACCOMPLISMENTS IN ELECTRICAL AND MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY |
|---|---|
| Year | 2011 |
| Authors | Ostoja Miletić and Mladen Todić |
| Page from | 271 |
| Page to | 274 |
POSITION OF THE NEUTRAL SURFACE DEFORMATION AT BENDING TWO LAYER COMPOSITES
| Scientific Conference | PROCEEDINGS OF THE 10th ANNIVERSARY INTERNATIONAL CONFERENCE ON ACCOMPLISMENTS IN ELECTRICAL AND MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY |
|---|---|
| Year | 2011 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 399 |
| Page to | 404 |
Signifikance of geometrical and mechanical parameters on delamination to the bending composites with two layers
| Scientific Conference | Internacional Conference on Innovative Technology in Design, Manifacturing and Production, IN-TECH 2010, Prague, Czech Republic |
|---|---|
| Year | 2010 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 507 |
| Page to | 511 |
UTICAJ ZAZORA PRI RAZDVAJANJU ZATVORENIH KONTURA
| Scientific Conference | 9. MEĐUNARODNA KONFERENCIJA O DOSTIGNUĆIMA ELEKTROTEHNIKE, MAŠINSTVA I INFOPRMATIKE |
|---|---|
| Publikacija | DEMI 2009 |
| Year | 2009 |
| Authors | Dušan Marić, Mladen Todić, and Ostoja Miletić |
| Page from | 195 |
| Page to | 200 |
Alternativna upotrebljivost čelika i dizajn kritičnih lokacija pogonskih vratila elektrolokomotiva
| Scientific Conference | IX Međunarodno savjetovawe o dostignućima elektro i mašinske industrije, DEMI 2009, Banja Luka |
|---|---|
| Publikacija | DEMI 2009 |
| Year | 2009 |
| Authors | Drago Blagojević, Mladen Todić, and Milosav Đurđević |
| Page from | 33 |
| Page to | 38 |
Tvrdoća u funkciji naponsko-deformacionog stanja dvoslojnog kompozita
| Scientific Conference | 9. MEĐUNARODNA KONFERENCIJA O DOSTIGNUĆIMA ELEKTROTEHNIKE, MAŠINSTVA I INFOPRMATIKE |
|---|---|
| Publikacija | DEMI 2009 |
| Year | 2009 |
| Authors | Mladen Todić, Ostoja Miletić, and Dušan Marić |
| Page from | 189 |
| Page to | 194 |
Metode procjene rizika na radnom mjestu
| Scientific Conference | DEMI-Međunarodni nučno-stručni skup o dostignućima elektro i mašinske industrije Banja Luka |
|---|---|
| Year | 2009 |
| Authors | Biljana Vranješ and Mladen Todić |
| Page from | 359 |
| Page to | 364 |
Naponsko-deformaciono stawe noseće strukture četvorostubne hidraulčne prese
| Scientific Conference | XXXIII Savjetovawe proizvodnog ma{instva Srbije 2009 |
|---|---|
| Publikacija | Zbornik radova, UNIVERZITET U BEOGRADU MAŠINSKI FAKULTET |
| Year | 2009 |
| Authors | Veso Đukanović, Mladen Todić, and Ostoja Miletić |
| Page from | 135 |
| Page to | 138 |
STRESS-DEFORMITY EXAMINATION OF ELEMENTS OF CONSTRUCTION SCAFFOLDING
| Scientific Conference | 25th Danubia-Adria Sympossium on Advances in Experimental Mechanics |
|---|---|
| Year | 2008 |
| Authors | Drago Blagojević, Mladen Todić, and Radomir Cvijić |
| Page from | 21 |
| Page to | 22 |
Stress-deformity examination of elements of construction scaffolding
| Scientific Conference | 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, Ceske Budejovice and Cesky Krumlov, Czech Republic, Septembr 2008 |
|---|---|
| Year | 2008 |
| Authors | Drago Blagojević, Mladen Todić, and Radomir Cvijić |
| Page from | 21 |
| Page to | 23 |
PRILOG KARAKTERIZACIJI VISOKOELASTIČNIH MATERIJALA REOLOŠKIM MODELIRANJEM
| Scientific Conference | SAVREMENI MATERIJALI, knjiga XIV |
|---|---|
| Publikacija | SAVREMENI MATERIJALI |
| Year | 2008 |
| Authors | Drago Blagojević, Mladen Todić, and Ostoja Miletić |
| Page from | 379 |
| Page to | 402 |
Uticaj triboloških efekata kontaktnih površina na fenomen ojačavanja
| Scientific Conference | XXXII Savjetovawe proizvodnog ma{instva sa me|unarodnim u~e{}em, SPMS, Novi Sad, Srbija, 2008 |
|---|---|
| Year | 2008 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 179 |
| Page to | 182 |
Genetski fazi ekspertski sistem u automatizovanom proizvodnom sistemu
| Scientific Conference | XXXII Savjetovawe proizvodnog ma{instva sa me|unarodnim u~e{}em, SPMS, Novi Sad, Srbija, 2008 |
|---|---|
| Year | 2008 |
| Authors | Tihomir Latinović, Mladen Todić, and Radenko Zrilić |
| Page from | 179 |
| Page to | 182 |
UTICAJ POLOŽAJA SLOJA DVOSLOJNOG KOMPOZITA PRI SAVIJANJU NA STABILNOST PROCESA
| Scientific Conference | VII MEĐUNARODNI NAUČNO-STRUČNI SKUP O DOSTIGNUĆIMA ELEKTROTEHNIKE, MAŠINSTVA I INFORMATIK |
|---|---|
| Publikacija | DEMI 2007 |
| Year | 2007 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 221 |
| Page to | 226 |
CAUSES FOR INTEGRITY LOSSES OF STEEL ANTENNA COLUMNS
| Scientific Conference | 1st International Congres of Serbian Society of Mechanics |
|---|---|
| Year | 2007 |
| Authors | Drago Blagojević, Radomir Cvijić, Valentina Golubović Bugarski, and Mladen Todić |
| Page from | 1141 |
| Page to | 1146 |
ISPITIVANJE NOSEĆE STRUKTURE HIDRAULIČNE PRESE
| Scientific Conference | VII MEĐUNARODNI NAUČNO-STRUČNI SKUP O DOSTIGNUĆIMA ELEKTROTEHNIKE, MAŠINSTVA I INFORMATIKE |
|---|---|
| Publikacija | DEMI 2007, Mašinski fakultet Banjaluka |
| Year | 2007 |
| Authors | Ostoja Miletić and Mladen Todić |
| Page from | 159 |
| Page to | 168 |
Prilog tehni;čkoj ekspertizi havarija čeličnih rešetkastih stubova
| Scientific Conference | VII MEĐUNARODNI NAUČNO-STRUČNI SKUP O DOSTIGNUĆIMA ELEKTROTEHNIKE MAŠINSTVA I INFORMATIKE |
|---|---|
| Year | 2007 |
| Authors | Drago Blagojević, Radomir Cvijić, Valentina Golubović Bugarski, and Mladen Todić |
| Page from | 35 |
| Page to | 44 |
Prilog tehničkoj eskspertizi havarija čeličnih rešetkastih stubova
| Scientific Conference | DEMI 2007 |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2007 |
| Authors | Drago Blagojević, Radomir Cvijić, Valentina Golubović Bugarski, and Mladen Todić |
| Page from | 35 |
| Page to | 44 |
Development of a Measurment Station for Determination of Force at the Wheel-rail Contact Point
| Scientific Conference | First South-East Europen Conference on Computational Mechames, SEECCM-06 |
|---|---|
| Year | 2006 |
| Authors | Drago Blagojević, Živko Babić, Mladen Todić, and Valentina Golubović Bugarski |
| Page from | 479 |
| Page to | 481 |
Dvostrano plakiranje čelika sa nerđajućim čelikom te obrada istog valjanjem
| Scientific Conference | VIII YUCORR |
|---|---|
| Publikacija | Knjiga radova |
| Year | 2006 |
| Authors | Slobodan Bunić, Veljko Đukić, Borislav Malinović, Savo Rističević, Branko Ušćumlić, Ranko Zrilić, Jovo Mandić, Mladen Todić, and Milorad Maksimović |
| Page from | 349 |
| Page to | 355 |
Analiza spoja eksplozijom plakiranog aluminijuma sa čelikom
| Scientific Conference | Metalni i nemetalni anorganski materijali |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2006 |
| Authors | Slobodan Bunić, Jovo Mandić, Borislav Malinović, Đurađ Davidović, Ranko Zrilić, and Mladen Todić |
| Page from | 125 |
| Page to | 130 |
Bifurkacija slojeva kod dvoslojnih kompozitnih materijala
| Scientific Conference | XXXI Savjetovawe proizvodnog mašinstva Srbije i Crne Gore sa međunarodnim učešćem |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2006 |
| Authors | Mladen Todić |
| Page from | 263 |
| Page to | 269 |
RAZVOJ MJERNE STANICE ZA ODREĐIVANJE SILE U TAČKI DODIRA TOČAK-ŠINA KORIŠTENJEM RAČUNARA
| Scientific Conference | IRMES'06 - ISTRAŽIVANJE I RAZVOJ MAŠINSKIH ELEMENATA I SISTEMA |
|---|---|
| Publikacija | ZBORNIK RADOVA IRMES'06 |
| Year | 2006 |
| Authors | Drago Blagojević, Živko Babić, Mladen Todić, and Valentina Golubović Bugarski |
RAZVOJ MJERNE STANICE ZA ODREĐIVANJE SILE U TAČKI DODIRA TOČAK-ŠINA KORIŠĆENJEM RAČUNARA
| Scientific Conference | Istraživanje i razvoj mašinskih elemenata i sistema, IRMES "06 |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2006 |
| Authors | Drago Blagojević, Mladen Todić, Živko Babić, and Valentina Golubović Bugarski |
| Page from | 423 |
| Page to | 428 |
Development of a Measurement Station for Determination of Force at the Wheel-rail Contact
| Scientific Conference | SEECCM-06 First South-East European Conference on Computational Mechanics |
|---|---|
| Publikacija | Proceedings SEECCM-06 |
| Year | 2006 |
| Authors | Drago Blagojević, Živko Babić, Mladen Todić, and Valentina Golubović Bugarski |
| Page from | 479 |
| Page to | 481 |
Position effect of the composition layer during punching and stamping out
| Scientific Conference | Svarka XXI vek Slavjanskie čtenija, Sbornik naučnih trudov, Lipcek 2004 |
|---|---|
| Publikacija | Zbornik naučnih trudov, kniga 2 |
| Year | 2004 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 589 |
| Page to | 595 |
Aktuelni trendovi razvoja i izčavanja mašina i uređaja u šumarstvu
| Scientific Conference | Naučno-stručni skup Perspektive razvoja šumarstva, 2003 |
|---|---|
| Publikacija | Zbornik radova naučnog stručnog skupa Perspektive razvoja šumarstva,2003 |
| Year | 2003 |
| Authors | Drago Blagojević, Mladen Todić, and Gordana Globočki Lakić |
| Page from | 197 |
| Page to | 200 |
Rezultati primjene tehnologije zavarivanja eksplozijom u procesu izrade hidrauličnih cilindara
| Scientific Conference | 28. JUPITER konferencija sa međunarodnim učešćem |
|---|---|
| Year | 2002 |
| Authors | Vid Jovišević, Ostoja Miletić, Zrilić Radenko, and Mladen Todić |
| Page from | 3.135 |
| Page to | 3.142 |
SIGNIFIKANTNOST PARAMETARA U PROCESU VUČENJA NA MEHANIČKE OSOVINE OSNOSIMETRIČNOG PROFILA
| Scientific Conference | 5. MEĐUNARODNO SAVJETOVANJE O DOSTIGNUĆI ELEKTRO I MAŠINSKE INDUSTRIJE |
|---|---|
| Publikacija | ZBORNIK RADOVA, DEMI 2002 |
| Year | 2002 |
| Authors | Mladen Todić, Ostoja Miletić, and Vid Jovišević |
| Page from | 91 |
| Page to | 96 |
PRIMJENA FAZY LOGIKE U EKSPERTNIM SISTEMIMA
| Scientific Conference | 5. MEĐUNARODNO SAVJETOVANJE O DOSTIGNUĆU ELEKTRO I MAŠINSKE INDUSTRIJE |
|---|---|
| Publikacija | ZBORNIK RADOVA, BANJALUKA 2002. |
| Year | 2002 |
| Authors | Tihomir Latinović, Mladen Todić, Krstan Bošnjak, Milan Šljivić, and Danilo Obradović |
| Page from | 385 |
| Page to | 390 |
UGAO OJAČAVANJA PRI SAVIJANJU PROFILISANJEM
| Scientific Conference | 5. Međunarodno savjetovanje o dostignućima elektro i mašinske industrije |
|---|---|
| Publikacija | ZBORNIK RADOVA, DEMI 2002 |
| Year | 2002 |
| Authors | Ostoja Miletić and Mladen Todić |
| Page from | 65 |
| Page to | 70 |
BILANS ENERGIJE PRI VUČENJU OSNOSIMETRIČNIH PROFILA
| Scientific Conference | 4. MEĐUNARODNO SAVJETOVANJE O DOSTIGNUĆIMA ELEKTRO I MAŠINSKE INDUSTRIJE |
|---|---|
| Publikacija | DEMI 2001 |
| Year | 2001 |
| Authors | Mladen Todić, Ostoja Miletić, Vid Jovišević, and Tihomir Latinović |
| Page from | 103 |
| Page to | 108 |
MODEL FMEA (FAILURE MODE EFECT ANALYSYS) EKSPERTNOG SOFTVERA SA BAZOM ZNANJA
| Scientific Conference | 3. MEĐUNARODMO SAVJETOVANJE O DOSTIGNUĆIMA ELEKTRO I MAŠINSKE INDUSTRIJE |
|---|---|
| Publikacija | Zbornik radova, DEMI 2000 |
| Year | 2001 |
| Authors | Tihomir Latinović, Krstan Bošnjak, Ostoja Miletić, and Mladen Todić |
| Page from | 138 |
| Page to | 140 |
PROCES PROŠIRIVANJA CIJEVNIH PRIPREMAKA ZA JEDNODIJELNE KLIZNE LEŽAJEVE
| Scientific Conference | 4. MEĐUNARODNO SAVJETOVANJE O DOSTIGNUĆIMA ELEKTRO I MAŠINSKE INDUSTRIJE |
|---|---|
| Publikacija | DEMI 2001 |
| Year | 2001 |
| Authors | Ostoja Miletić, Mladen Todić, and Milosav Đurđević |
| Page from | 75 |
| Page to | 80 |
NEKI ASPEKTI ISTRAŽIVANJA MOGUĆNOSTI PROIZVODNJE TEŠKIH PRESA
| Scientific Conference | 4. MEĐUNARODNO SAVJETOVANJE O DOSTIGNUĆIMA ELEKTRO I MAŠINSKE INDUSTRIJE |
|---|---|
| Publikacija | DEMI 2001 |
| Year | 2001 |
| Authors | Vid Jovišević, Pantelija Dakić, Ostoja Miletić, and Mladen Todić |
| Page from | 45 |
| Page to | 50 |
ANALIZA PROCESA SAVIJANJA TANKIH ZIDNIH OBRADAKA U KALUPU I PROFILISANJEM
| Scientific Conference | 4. MEĐUNARODNO SAVJETOVANJE O DOSTIGNUĆIMA ELEKTRO I MAŠINSKE INDUSTRIJE |
|---|---|
| Publikacija | DEMI 2001 |
| Year | 2001 |
| Authors | Ostoja Miletić, Pantelija Dakić, Mladen Todić, and Tihomir Latinović |
| Page from | 93 |
| Page to | 102 |
| Web address | 621.001.6: 621.3001.6 |
Modularni ekspertni sistem za FMEA analizu kao fundamentalni dio QA 9000 standarda
| Scientific Conference | Balkanska konferencije 2000 |
|---|---|
| Year | 2000 |
| Authors | Tihomir Latinović, Krstan Bošnjak, Ostoja Miletić, and Mladen Todić |
PRIKAZ REZULTATA INTEGRACIJE EKSPERTNIH SISTEMA I MODELA OPTIMIZACIJE U PROJEKTOVANJU TEHNOLOŠKIH PROCESA
| Scientific Conference | 3. MEĐUNARODMO SAVJETOVANJE O DOSTIGNUĆIMA ELEKTRO I MAŠINSKE INDUSTRIJE |
|---|---|
| Publikacija | Zbornik radoava, 2000 |
| Year | 2000 |
| Authors | Vid Jovišević, Ostoja Miletić, and Mladen Todić |
| Page from | 54 |
| Page to | 59 |
KONCEPCIJA KRIVAJNE PRESE S OBRTNIM ALATOM ZA PRESOVANJE U VRUĆEM STANJU
| Scientific Conference | 3. MEĐUNARODMO SAVJETOVANJE O DOSTIGNUĆIMA ELEKTRO I MAŠINSKE INDUSTRIJE |
|---|---|
| Publikacija | Zbornik radova DEMI 2000 |
| Year | 2000 |
| Authors | Ostoja Miletić, Vid Jovišević, Mladen Todić, and Tihomir Latinović |
| Page from | 102 |
| Page to | 105 |
NORMALNI I TANGENCIJALNI NAPONI NA KONTAKTNOJ POVRŠINI PRI VUČENJU OSNOSIMETRIČNIH PROFILA
| Scientific Conference | 3. MEĐUNARODMO SAVJETOVANJE O DOSTIGNUĆIMA ELEKTRO I MAŠINSKE INDUSTRIJE |
|---|---|
| Publikacija | Zbornik radova, DEMI 2000 |
| Year | 2000 |
| Authors | Mladen Todić, Ostoja Miletić, and Tihomir Latinović |
| Page from | 106 |
| Page to | 109 |
Optimizacija uređaja čvorne tačke mreže transportnog sistema
| Scientific Conference | II Me|unarodno savjetovawe o dostignu}ima elektro i ma{inskoj industrije , DEMI’99 |
|---|---|
| Publikacija | Zbornik radova, DEMI 99 |
| Year | 1999 |
| Authors | Mladen Todić and Ostoja Miletić |
| Page from | 134 |
| Page to | 137 |
Visokobrzinska mašina sa energijom eksplozije za probijanje u teškoj mašinogradnji
| Scientific Conference | XXVII Savjetovanje proizvodnog mašinstva Jugoslavije sa mđ|unarodnim učešćem, Niš, |
|---|---|
| Publikacija | Zbornik radova |
| Year | 1998 |
| Authors | Ostoja Miletić, Predrag Popović, and Mladen Todić |
Optimizacija obradnog sistema za proces obrade trake
| Scientific Conference | VI Me|unarodna konferencija fleksibilne tehnologije, Sombor-Jugoslavija, 1997 |
|---|---|
| Publikacija | Zbornik radova, Sombor-Jugoslavija |
| Year | 1997 |
| Authors | Ostoja Miletić, Krstan Bošnjak, and Mladen Todić |
| Page from | 535 |
| Page to | 542 |
Prilog matematičkom modeliranju procesa izvlačenja u cilju minimizacije opterećenja alata i obradnog sistema
| Scientific Conference | PRVI MEĐUNARODNI NAUČNO-STRUČNI SKUP, TEŠKA MAŠINOGRADNJA, TM "93, KRUŠEVAC-VRNJAČKA BANJA |
|---|---|
| Publikacija | Zbornik radova TM "93 |
| Year | 1993 |
| Authors | Mladen Todić and Milan Jurković |
| Page from | 352 |
| Page to | 357 |
ISTRAŽIVANJE ENERGETSKOG STEPENA ISKORIŠTENJA PROCESA VUČENJA U CILJU PROJEKTOVANJA OPTIMALNIH MAŠINA
| Scientific Conference | PRVI MEĐUNARODNI NAUČNO-STRUČNI SKUP, TEŠKA MAŠINOGRADNJA, TM "93, KRUŠEVAC-VRNJAČKA BANJA |
|---|---|
| Publikacija | Zbornik radova, Teška mašinogradnja 1993. |
| Year | 1993 |
| Authors | Mladen Todić and Milan Jurković |
| Page from | 461 |
| Page to | 466 |
RAZVOJ FLEKSIBILNE LINIJE ZA LABORATORIJSKA ISTRAŽIVANJA I MINI PROIZVODNJU PROCESA OBRADE DEFORMISANJEM
| Scientific Conference | PRVI MEĐUNARODNI NAUČNO-STRUČNI SKUP, TEŠKA MAŠINOGRADNJA, TM "93, KRUŠEVAC-VRNJAČKA BANJA |
|---|---|
| Publikacija | Zbornik radova, Teška mašinogradnja, TM "93 |
| Year | 1993 |
| Authors | Milan Jurković, Vučko Mečanin, and Mladen Todić |
| Page from | 84 |
| Page to | 89 |
Identifikacija i optimizacija tribolo{kih procesa pri obradi metala deformisawem
| Scientific Conference | JUTRIB |
|---|---|
| Publikacija | Zbornik radova JUTRIB |
| Year | 1991 |
| Authors | Milan Jurković, Milan Šljivić, and Mladen Todić |
| Page from | 80 |
| Page to | 86 |
Istraživanje temperaturnog stanja na kontaktnoj površini pri procesu hladnog vučewa niskougljeničnih čelika
| Scientific Conference | JUTRIB |
|---|---|
| Publikacija | Zbornik radova |
| Year | 1991 |
| Authors | Mladen Todić and Milan Jurković |
| Page from | 127 |
| Page to | 130 |
Prilog razvoju fleksibilnih tehnolo{kih modula linija za vaqawe profila
| Scientific Conference | BIAM 90 |
|---|---|
| Year | 1990 |
| Authors | Milan Jurković, Milan Šljivić, Radenko Zrilić, and Mladen Todić |
Razvoj i osvajawe fleksibilnog obradnog sistema za izradu profila
| Scientific Conference | BIAM 90 |
|---|---|
| Publikacija | Zbornik radova |
| Year | 1990 |
| Authors | Milan Jurković, Radenko Zrilić, and Mladen Todić |
Other papers
Komparativna analiza modernih metoda u merenju sa stanovišta revizije standarda ISO 9000
| Year | 2016 |
|---|---|
| Authors | Tihomir Latinović, Krstan Bošnjak, Ostoja Miletić, and Mladen Todić |
Provjera davača za mjerenje osovinskog opterećenja na uređaju sa valjcima
| Publisher | Univerzitet u Banjoj Luci |
|---|---|
| ISSN/ISBN | 1986-5449 |
| Year | 2014 |
| Authors | Živko Pejašinović, Goran Jotić, and Mladen Todić |
| Page from | 9 |
| Page to | 15 |
PRILOG ISTRAŽIVANJU POLOŽAJA NEUTRALNIH LINIJA PRI PROFILISANJU VIŠESLOJNIH MATERIJALA
| Publisher | Mašinski fakultet |
|---|---|
| Year | 2006 |
| Authors | Mladen Todić |
| Page from | 0 |
| Page to | 153 |
KOMPLEKSNA OPTIMIZACIJA PROCESA IZVLAČENJA OSNOSIMETRI^NIH PROFILA I ŽICE
| Publisher | Mašinski fakultet |
|---|---|
| Year | 1992 |
| Authors | Mladen Todić |
| Page from | 0 |
| Page to | 167 |
Books and bibiliographies
PROJEKTOVANJE SISTEMA ZAŠTITE I UREĐAJA
| Publisher | Univerzitet u Banjoj Luci, Mašinski fakultet Banja Luka |
|---|---|
| ISBN | 978-99938-39-81-1 |
| Year | 2018 |
| Authors | Mladen Todić and Biljana Vranješ |
| Type | osnovni udžbenik |
| Page count | 201 |
OBRADNI SISTEMI ZA DEFORMISANJE
| Publisher | Univerzitet u Banjoj Luci, Mašinski fakultet Banja Luka |
|---|---|
| ISBN | 978-99938-39-58-3 |
| Year | 2015 |
| Authors | Mladen Todić and Ostoja Miletić |
| Type | osnovni udžbenik |
| Page count | 259 |
STABILNOST ELASTO-PLASTIČNIH SISTEMA (Teorijska razmatranja)
| Publisher | Univerzitet u Banjoj Luci, Mašinski fakultet Banja Luka |
|---|---|
| ISBN | 978-99938-39-540-8 |
| Year | 2012 |
| Authors | Ostoja Miletić and Mladen Todić |
| Type | naučna knjiga |
| Page count | 259 |
NOSEĆA STRUKTURA MAŠINA I UREĐAJA
| Publisher | Mašinski fakultet Banja Luka |
|---|---|
| ISBN | 99938-39-04-3 |
| Year | 2004 |
| Authors | Ostoja Miletić and Mladen Todić |
| Type | naučna knjiga |
| Page count | 225 |
.jpg)
.jpg)