prof. dr Stevo Borojevic
vanredni profesor
Nastavnik - II-4
Faculty of Mechanical Engineering
051/433-066
Courses
Mašinski fakultet Šumarski fakultet Tehnološki fakultetBibliography
Journal papers
Multi-Objective Optimization of Milling Ti-6Al-4V Alloy for Improved Surface Integrity and Sustainability Performance
| Journal | Machines |
|---|---|
| Year | 2025 |
| Authors | Đorđe Čiča, Saša Tešić, Milisav Marković, Branislav Sredanović, Stevo Borojević, Milan Zeljković, Davorin Kramar, and Franci Pušavec |
| Volumen | 13 |
| Number | 3 |
| Web address | https://www.mdpi.com/2075-1702/13/3/221 |
Optimization of superalloy Inconel 718 micro‑milling process by combined Taguchi and multi‑criteria decision making method
| DOI | 10.1007/s40430-024-04996-7 |
|---|---|
| Journal | JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
| Year | 2024 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 46 |
| Page from | 1 |
| Page to | 14 |
| Web address | https://link.springer.com/article/10.1007/s40430-024-04996-7 |
Energy efficiency of the Process Planning Design in the scope of Industry 4.0
| DOI | https://doi.org/10.1088/1742-6596/2540/1/012013 |
|---|---|
| Journal | Journal of physics. Conference series (Print) |
| Year | 2023 |
| Authors | Stevo Borojević, Branislav Sredanović, Mijodrag Milošević, Milenko Sekulić, and Sergej Janković |
| Volumen | 2540 |
| Page from | 012013 |
An Integrated Intelligent CAD/CAPP Platform: Part I-Product Design Based on Elementary Machining Features
| DOI | doi.org/10.17559/TV-20211012084143 |
|---|---|
| Journal | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
| Year | 2022 |
| Authors | Stevo Borojević, Mijodrag Milošević, Dejan Lukić, and Boško Borojević |
| Volumen | 29 |
| Number | 4 |
| Page from | 1301 |
| Page to | 1309 |
| Web address | https://hrcak.srce.hr/279482 |
Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters under MQL Condition
| DOI | https://doi.org/10.24874/ti.1301.05.22.07 |
|---|---|
| Journal | TRIBOLOGY IN INDUSTRY |
| Year | 2022 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 44 |
| Number | 3 |
| Page from | 498 |
| Page to | 507 |
| Web address | https://www.tribology.rs/journals/2022/2022-3/2022-3-11.html |
Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions
| DOI | https://doi.org/10.1007/s40684-021-00413-9 |
|---|---|
| Journal | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY |
| Year | 2022 |
| Authors | Saša Tešić, Đorđe Čiča, Stevo Borojević, Branislav Sredanović, Milan Zeljković, Davorin Kramar, and Franci Pusavec |
| Volumen | 9 |
| Number | November 2022 |
| Page from | 1427 |
| Page to | 1437 |
Experimental analysis and optimization of thin-walled tubular parts milling
| DOI | http://doi.org/10.24867/JPE-2022-02-006 |
|---|---|
| Journal | Journal of production engineering |
| Year | 2022 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 25 |
| Number | 4 |
| Page from | 6 |
| Page to | 12 |
| Web address | http://www.jpe.ftn.uns.ac.rs/papers/2022/no2/2-Sredanovic_JPE_25_No2.pdf |
Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska
| Journal | International Scentific Journal Industry 4.0 |
|---|---|
| Year | 2022 |
| Authors | Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić, and Jovica Ilić |
| Volumen | 6 |
| Page from | 240 |
| Page to | 243 |
| Web address | https://stumejournals.com/i4.htm |
An Integrated Intelligent CAD/CAPP Platform: Part II-Operation Sequencing Based on Genetic Algorithm
| DOI | https://doi.org/10.17559/TV-20211012084632 |
|---|---|
| Journal | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
| Year | 2022 |
| Authors | Stevo Borojević, Dragan Matić, and Miroslav Dragić |
| Volumen | 29 |
| Number | 5 |
| Page from | 1686 |
| Page to | 1695 |
Capability of micro-milling in machining of difficult-to-cut materials
| Journal | International Scentific Journal Industry 4.0 |
|---|---|
| Year | 2021 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 6 |
| Number | 6 |
| Page from | 218 |
| Page to | 221 |
| Web address | https://stumejournals.com/journals/i4/2021/6/218 |
Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece
| Journal | ACTA TECHNICA CORVINIENSIS |
|---|---|
| Year | 2021 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 14 |
| Number | 4 |
| Page from | 29 |
| Page to | 33 |
| Web address | http://acta.fih.upt.ro/ACTA-2021-4.html |
Evaluation of the technological effects of application of the FMS elements
| DOI | https://doi.org/10.1088/1757-899X/749/1/012018 |
|---|---|
| Journal | IOP Conference series: Materials Science and Engineering |
| Year | 2020 |
| Authors | Dejan Lukić, Aco Antić, Stevo Borojević, Mitar Jocanović, and Ivan Kuric |
| Volumen | 749 |
| Page from | 1 |
| Page to | 8 |
Multiple performance characteristics optimization in end milling of thin-walled parts using desirability function
| Journal | TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING |
|---|---|
| Year | 2020 |
| Authors | Đorđe Čiča, Stevo Borojević, Goran Jotić, Branislav Sredanović, and Saša Tešić |
| Volumen | 44 |
| Number | 1 |
| Page from | 84 |
| Page to | 94 |
Application of Fuzzy Logic in the Analysis of Surface Roughness of Thin-Walled Aluminum Parts
| DOI | https://doi.org/10.1007/s12541-019-00229-3 |
|---|---|
| Journal | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING |
| Year | 2020 |
| Authors | Jovan Vukman, Dejan Lukić, Stevo Borojević, Dragan Rodić, and Mijodrag Milošević |
| Volumen | 21 |
| Number | 1 |
| Page from | 91 |
| Page to | 102 |
Analysis of Operational Readiness and Reliability of the Paper Machine System after Implementation of Model of Influence
| DOI | 10.17559/TV-20151119083244 |
|---|---|
| Journal | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
| Year | 2018 |
| Authors | Dejan Branković, Zdravko Milovanović, and Stevo Borojević |
| Volumen | 25 |
| Number | No.Supplement 1 |
| Page from | 126 |
| Page to | 134 |
| Web address | https://doi.org/10.17559/TV-20151119083244 |
Analysis of Operational Readiness and Reliability of the Paper Machine System after the Implementation of Model of Influence
| Journal | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
|---|---|
| Year | 2018 |
| Authors | Dejan Branković, Zdravko Milovanović, and Stevo Borojević |
| Volumen | 25 |
| Number | 1 |
| Page from | 126 |
| Page to | 134 |
| Web address | https://doi.org/10.17559/TV-20151119083244 |
The possibilities for application of STEP-NC in actual production conditions
| DOI | https://doi.org/10.1007/s12206-018-0634-6 |
|---|---|
| Journal | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
| Year | 2018 |
| Authors | Dejan Lukić, Saša Živanović, Jovan Vukman, Mijodrag Milošević, Stevo Borojević, and Aco Antić |
| Volumen | 32 |
| Number | 7 |
| Page from | 3317 |
| Page to | 3328 |
Optimization of process parameters for machining of Al 7075 thin‐walled structures
| DOI | https://doi.org/10.14743/apem2018.2.278 |
|---|---|
| Journal | Advances in Production Engineering & Management |
| Year | 2018 |
| Authors | Stevo Borojević, Dejan Lukić, Mijodrag Milošević, Jovan Vukman, and Davorin Kramar |
| Volumen | 13 |
| Number | 2 |
| Page from | 125 |
| Page to | 135 |
Prediction of natural frequencies of the tool controlled mode using soft computing techniques
| Journal | International Scentific Journal Industry 4.0 |
|---|---|
| Year | 2017 |
| Authors | Đorđe Čiča, Milan Zeljkovic, Branislav Sredanović, and Stevo Borojević |
| Volumen | 1 |
| Number | 1 |
| Page from | 11 |
| Page to | 14 |
Multi‐criteria selection of manufacturing processes in the conceptual process planning
| DOI | https://doi.org/10.14743/apem2017.2.247 |
|---|---|
| Journal | Advances in Production Engineering & Management |
| Year | 2017 |
| Authors | Dejan Lukić, Mijodrag Milošević, Aco Antić, Stevo Borojević, and Mirko Ficko |
| Volumen | 12 |
| Number | 2 |
| Page from | 151 |
| Page to | 162 |
A model of collaborative process planning system (e-CAPP)
| DOI | https://doi.org/10.17559/TV-20160222122629 |
|---|---|
| Journal | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
| Year | 2017 |
| Authors | Mijodrag Milošević, Dejan Lukić, Stevo Borojević, Goran Šimunović, and Aco Antić |
| Volumen | 24 |
| Number | 1 |
| Page from | 97 |
| Page to | 103 |
Identification of dynamical contact parameters for spindle-holder-tool assembly
| Journal | Journal of production engineering |
|---|---|
| Year | 2016 |
| Authors | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Volumen | 19 |
| Number | 1 |
| Page from | 57 |
| Page to | 60 |
Dynamic analysis of spindle-holder-tool assembly
| Journal | Machine Design |
|---|---|
| Year | 2016 |
| Authors | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Volumen | 8 |
| Number | 2 |
| Page from | 53 |
| Page to | 56 |
Application of STEP-NC in the integration CAx and CNC systems: Case studies
| Journal | Machine Design |
|---|---|
| Year | 2016 |
| Authors | Dejan Lukić, Jovan Vukman, Saša Živanović, Mijodrag Milošević, Stevo Borojević, Goran Jovičić, and Cvjetin Mlađenović |
| Volumen | 8 |
| Number | 1 |
| Page from | 23 |
| Page to | 26 |
Fundamentals Of The Optimization Of Machining Process Planning For The Thin-Walled Aluminum Parts
| Journal | Journal of production engineering |
|---|---|
| Year | 2016 |
| Authors | Jovan Vukman, Dejan Lukić, Mijodrag Milošević, Stevo Borojević, Aco Antić, and Mića Đurđev |
| Volumen | 19 |
| Number | 2 |
| Page from | 53 |
| Page to | 56 |
Application of multi-criteria decision making for manufacturing process evaluation and selection
| Journal | Journal of production engineering |
|---|---|
| Year | 2014 |
| Authors | Dejan Lukić, Mijodrag Milošević, Stevo Borojević, Jovan Vukman, and Mića Đurđev |
| Volumen | 17 |
| Number | 2 |
| Page from | 83 |
| Page to | 86 |
| Web address | http://www.jpe.ftn.uns.ac.rs |
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers
| Journal | ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering |
|---|---|
| Year | 2014 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Volumen | 12 |
| Number | 2 |
| Page from | 127 |
| Page to | 132 |
Selection and configuration of modular components for modular fixture design
| Journal | Journal of production engineering |
|---|---|
| Year | 2013 |
| Authors | Stevo Borojević and Vid Jovišević |
| Volumen | 16 |
| Number | 1 |
| Page from | 21 |
| Page to | 26 |
| Web address | http://www.jpe.ftn.uns.ac.rs |
Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks
| Journal | Journal of production engineering |
|---|---|
| Year | 2012 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, Branislav Sredanović, and Stevo Borojević |
| Volumen | 15 |
| Number | 2 |
| Page from | 37 |
| Page to | 40 |
Analysis of Faces’ Accessibility for the Purpose of Modular Fixtures Design
| Journal | STROJARSTVO |
|---|---|
| Year | 2012 |
| Authors | Stevo Borojević, Vid Jovišević, Velimir Todić, Mijodrag Milošević, and Dejan Lukić |
| Volumen | 54 |
| Number | 2 |
| Page from | 127 |
| Page to | 133 |
| Web address | http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137860 |
Development of the Computer-Aided Process Planning (CAPP) System for Polymer Injection Mold Manufacturing
| Journal | METALURGIJA |
|---|---|
| Year | 2011 |
| Authors | Jovan Tepić, Velimir Todić, Dejan Lukić, Mijodrag Milošević, and Stevo Borojević |
| Volumen | 50 |
| Number | 4 |
| Page from | 273 |
| Page to | 277 |
| Web address | http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.454.4189&rep=rep1&type=pdf |
Dijagnostika tehničkih pokazatelja održavanja termoelektrane, Dio I - Priprema za poređenje sa "najboljom praksom" (benchmarking)
| Journal | Tehnička dijagnostika |
|---|---|
| Year | 2009 |
| Authors | Zdravko Milovanović, Vera Šijački-Žeravčić, Vinko Babić, and Stevo Borojević |
| Volumen | 8 |
| Number | 2 |
| Page from | 41 |
| Page to | 45 |
| Web address | www.tehnickadijagnostika.rs |
Modeling, simulation and optimization of process planning
| Journal | Journal of production engineering |
|---|---|
| Year | 2009 |
| Authors | Stevo Borojević, Vid Jovišević, and Simo Jokanović |
| Volumen | 12 |
| Number | 1 |
| Page from | 87 |
| Page to | 90 |
| Web address | http://www.jpe.ftn.uns.ac.rs |
Development of Application for Analysis of Machinability Index
| Journal | TRIBOLOGY IN INDUSTRY |
|---|---|
| Year | 2009 |
| Authors | Gordana Globočki Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović |
| Volumen | 31 |
| Number | 1&2 |
| Page from | 57 |
| Page to | 60 |
Kontrola kvaliteta za prozore i vrata u procesu CE označavanja
| Journal | Interfob |
|---|---|
| Year | 2009 |
| Authors | Vid Jovišević and Stevo Borojević |
| Number | 3 |
| Page from | 28 |
| Page to | 31 |
Regulatorna tehnika EU za CE označavanje tehničkih industrijskih proizvoda
| Journal | Interfob |
|---|---|
| Year | 2008 |
| Authors | Vid Jovišević and Stevo Borojević |
| Number | 2 |
| Page from | 34 |
| Page to | 37 |
Conference papers
SUPPLY CHAIN FLEXIBILITY AND SMEs: THE ROLE OF HUMAN RESOURCE FLEXIBILITY
| Scientific Conference | International Conference on Business, Management, and Economics Enginering Future-BME |
|---|---|
| DOI | https://doi.org/10.24867/FUTURE-BME-2024-055 |
| Publikacija | Proceedings International Conference on Business, Management, and Economics Enginering Future-BME |
| Year | 2024 |
| Authors | Miroslav Dragić, Stevo Borojević, and Nebojša Suvajčević |
| Page from | 499 |
| Page to | 506 |
| Web address | https://doi.org/10.24867/FUTURE-BME-2024-055 |
Capability of micro-milling in machining of difficult-to-cut materials
| Scientific Conference | VI International Scientific Conference Industry 4.0 |
|---|---|
| Publikacija | Proceedings of VI International Scientific Conference Industry 4.0 |
| Year | 2023 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Page from | 220 |
| Page to | 223 |
Energy consumption analysis and parameter optimization in high-feed milling operation
| Scientific Conference | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023 |
|---|---|
| Publikacija | Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023 |
| Year | 2023 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, Dajana Jokić, and Davorin Kramar |
| Page from | 41 |
| Page to | 46 |
Obrazovanje inženjera proizvodnog mašinstva za Industriju 4.0 – izazovi, šanse, mogućnosti
| Scientific Conference | XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023 |
|---|---|
| Publikacija | Zbornik radova sa XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023 |
| Year | 2023 |
| Authors | Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević, and Branislav Sredanović |
| Page from | 222 |
| Page to | 225 |
Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska
| Scientific Conference | VII International Scientific Conference Industry 4 |
|---|---|
| Publikacija | Proceedings of VII International Scientific Conference Industry 4 |
| Year | 2022 |
| Authors | Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić, and Jovica Ilić |
| Page from | 277 |
| Page to | 280 |
Eksperimentalna analiza i optimizacija tvrdoće obrađene površine u kriogenim i MQL uslovima glodanja loptastim glodalom legure titanijuma Ti-6Al-4V
| Scientific Conference | 43. JUPITER konferencija |
|---|---|
| Year | 2022 |
| Authors | Saša Tešić, Milan Zeljković, Slobodan Tabaković, Đorđe Čiča, Stevo Borojević, and Branislav Sredanović |
| Page from | 3.73 |
| Page to | 3.78 |
Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja
| Scientific Conference | 43. JUPITER konferencija |
|---|---|
| Publikacija | Zbornik radova sa 43. JUPITER konferencije |
| Year | 2022 |
| Authors | Stevo Borojević, Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Milan Ćulum |
| Page from | 11 |
| Page to | 16 |
Education of production engineers for Industry 4.0
| Scientific Conference | 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022 |
|---|---|
| Publikacija | Proceedings of 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022 |
| Year | 2022 |
| Authors | Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević, and Branislav Sredanović |
| Page from | 91 |
| Page to | 96 |
Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V
| Scientific Conference | 38th International Conference on Production Engineering Serbia ICPE 2021 |
|---|---|
| Publikacija | Proceedings of 38th International Conference on Production Engineering Serbia ICPE 2021 |
| Year | 2021 |
| Authors | Saša Tešić, Milan Zeljković, Đorđe Čiča, Stevo Borojević, and Branislav Sredanović |
| Page from | 96 |
| Page to | 101 |
Experimental analysis and optimization of thin-walled tubular parts milling
| Scientific Conference | 14th International Scientific Conference MMA 2018 |
|---|---|
| Publikacija | Proceeding of 14th International Scientific Conference MMA 2018 |
| Year | 2021 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Page from | 31 |
| Page to | 36 |
Energy consumption model of the face milling
| Scientific Conference | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2021, Banja Luka |
|---|---|
| Year | 2021 |
| Authors | Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović, and Goran Jotić |
| Page from | 89 |
| Page to | 93 |
| Web address | https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf |
Application of analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece
| Scientific Conference | DEMI 2021 15th International Conference on Accomplishments in Mechanical and Industrial Engineering |
|---|---|
| Publikacija | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering |
| Year | 2021 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Page from | 71 |
| Page to | 77 |
| Web address | https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf |
Energy consumption model of the face milling
| Scientific Conference | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021 |
|---|---|
| Publikacija | Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021 |
| Year | 2021 |
| Authors | Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović, and Goran Jotić |
| Page from | 89 |
| Page to | 93 |
Automatizacija projektovanja proizvoda primjenom CAD sistema nove generacije
| Scientific Conference | Jupiter konferencija |
|---|---|
| Year | 2020 |
| Authors | Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Saša Tešić |
| Page from | 2.20 |
| Page to | 2.25 |
Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel
| Scientific Conference | IV International Scientific Conference Industry 4.0 |
|---|---|
| Publikacija | proceedings of IV International Scientific Conference Industry 4.0 |
| Year | 2019 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Page from | 283 |
| Page to | 286 |
INVESTIGATION OF THE EFFECTS OF THE CUTTER PATH STRATEGIES ON MACHINING TIME AND SURFACE ROUGHNESS IN THREE-AXIS SCULPTURED SURFACE MACHINING
| Scientific Conference | 14th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2019, Banja Luka |
|---|---|
| Year | 2019 |
| Authors | Djordje Cica, Saša Tešić, Branislav Sredanović, and Stevo Borojević |
| Page from | 131 |
| Page to | 138 |
Investigation of the effects of the cutter path strategies on machining time and surface roughness in three-axis sculptured surface machining
| Scientific Conference | 14th International Conference on Accomplishments in Mechanical and Industrial Engineering |
|---|---|
| Year | 2019 |
| Authors | Đorđe Čiča, Sasa Tesic, Branislav Sredanović, and Stevo Borojević |
| Page from | 131 |
| Page to | 138 |
A Cloud-Based Process Planning System in Industry 4.0 Framework
| Scientific Conference | International Conference on the Industry 4.0 model for Advanced Manufacturing - Springer |
|---|---|
| DOI | https://doi.org/10.1007/978-3-030-18180-2_16 |
| Publikacija | Proceedings of the 4th International Conference on the Industry 4.0 Model for Advanced Manufacturing |
| Year | 2019 |
| Authors | Mijodrag Milošević, Dejan Lukić, Stevo Borojević, Aco Antić, and Mića Đurđev |
| Page from | 1 |
| Page to | 10 |
STEP MODEL OF MACHINING FEATURES OF SWEEP TYPE
| Scientific Conference | MMA 2018 - FLEXIBLE TECHNOLOGIES |
|---|---|
| DOI | ISBN 978-86-6022-094-5, COBISS.SR-ID 325441799 |
| Publikacija | MMA 2018 |
| Year | 2018 |
| Authors | Simo Jokanović, Vlastimir Pejić, and Stevo Borojević |
| Page from | 169 |
| Page to | 174 |
| Web address | http://www.mma.ftn.uns.ac.rs/files/MMA2018-PROCEEDINGS.pdf |
Optimization of process parameters for stabilization and improvement of the turning process capability
| Scientific Conference | 13th International Scientific Conference - MMA |
|---|---|
| Publikacija | Originalni naučni rad |
| Year | 2018 |
| Authors | Luka Čerče, Stevo Borojević, and Davorin Kramar |
| Page from | 15 |
| Page to | 20 |
Experimental research of the influence of high-speed machining parameters on time and surface roughness of thin-walled parts
| Scientific Conference | 13th International Scientific Conference - MMA |
|---|---|
| Publikacija | Originalni naučni rad |
| Year | 2018 |
| Authors | Jovan Vukman, Dejan Lukić, Stevo Borojević, Mijodrag Milošević, and Davorin Kramar |
| Page from | 227 |
| Page to | 231 |
ARTIFICIAL NEURAL NETWORKS MODEL FOR THE PREDICTION OF SURFACE ROUGHNESS IN MACHINING THIN WALLED PARTS
| Scientific Conference | MMA 2018 Flexible Technologies |
|---|---|
| Year | 2018 |
| Authors | Đorđe Čiča, Stevo Borojević, Branislav Sredanović, and Saša Tešić |
| Page from | 75 |
| Page to | 78 |
Izbor putanje kretanja alata pri obradi složenih tankozidnih aluminijumskih struktura
| Scientific Conference | 41. konferencija sa međunarodnim učešćem JUPITER |
|---|---|
| Publikacija | Originalni naučni rad |
| Year | 2018 |
| Authors | Stevo Borojević, Dejan Lukić, Mijodrag Milošević, Jovan Vukman, and Davorin Kramar |
| Page from | 2.1 |
| Page to | 2.8 |
Artificial neural networks model for the prediction of surface roughness in machining thin walled parts
| Scientific Conference | 13th International scientific conference MMA 2018 - Flexible technologies |
|---|---|
| Year | 2018 |
| Authors | Đorđe Čiča, Stevo Borojević, Branislav Sredanović, and Sasa Tesic |
| Page from | 75 |
| Page to | 78 |
Modeling and simulation of production process for the tools of the press brake
| Scientific Conference | 13th International scientific conference MMA 2018 - Flexible technologies |
|---|---|
| Year | 2018 |
| Authors | Stevo Borojević, Vid Jovišević, Đorđe Čiča, and Branislav Sredanović |
| Page from | 179 |
| Page to | 182 |
Analysis of comparative measurement results for thin-walled Al 7075 alloy structures
| Scientific Conference | International Scientific Conference MMA |
|---|---|
| Publikacija | Proceedings of International Scientific Conference MMA |
| Year | 2018 |
| Authors | Goran Jotić, Stevo Borojević, Miodrag Hadžistević, Branko Štrbac, and Jovan Vukman |
| Page from | 127 |
| Page to | 130 |
Tehnološki procesi obrade tankozidnih delova od legure aluminijuma
| Scientific Conference | Scientific conference with international participation ETIKUM |
|---|---|
| Publikacija | Originalni naučni rad |
| Year | 2017 |
| Authors | Jovan Vukman, Dejan Lukić, Mijodrag Milošević, Stevo Borojević, Mića Đurđev, and Aco Antić |
| Page from | 89 |
| Page to | 92 |
Analyzing possibilities of improving machining process planning and optimization by applying feature technologies and simulation technique
| Scientific Conference | VII International conference of industrial engineering and enviromental protection (IIZS 2017) |
|---|---|
| Publikacija | Rad po pozivu - Originalni naučni rad |
| Year | 2017 |
| Authors | Dejan Lukić, Mijodrag Milošević, Jovan Vukman, Mića Đurđev, Stevo Borojević, and Aco Antić |
| Page from | 1 |
| Page to | 9 |
An Integration of Bio-inspired Algorithms and Fuzzy Logic for Tool Wear Estimation in Hard Turning
| Scientific Conference | 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017 |
|---|---|
| Year | 2017 |
| Authors | Đorđe Čiča, Branislav Sredanović, Stevo Borojević, and Davorin Kramar |
| Page from | 1 |
| Page to | 12 |
Prediction of natural frequencies of the tool controlled mode using soft computing techniques
| Scientific Conference | International Scientific Conference Industry 4.0 |
|---|---|
| Year | 2016 |
| Authors | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Page from | 22 |
| Page to | 25 |
Pregled heurističkih metoda za rješavanje problema planiranja tehnoloških operacija mašinske obrade prizmatičnih radnih predmeta
| Scientific Conference | V Mathematical conference of Republic of Srpska |
|---|---|
| Publikacija | Proceedings of the Sixth Mathematical Conference of the Republic of Srpska |
| Year | 2016 |
| Authors | Stevo Borojević and Dragan Matić |
| Page from | 309 |
| Page to | 323 |
Identification of dynamical contact parameters for spindle-holder-tool assembly
| Scientific Conference | International Scientific Conference MMA 2015 - Flexible Technologies |
|---|---|
| Year | 2015 |
| Authors | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Page from | 67 |
| Page to | 71 |
Parts design based on manufacturing features
| Scientific Conference | 12th International Scientific Conference - MMA |
|---|---|
| Publikacija | Originalni naučni rad |
| Year | 2015 |
| Authors | Stevo Borojević, Vid Jovišević, Velimir Todić, and Milan Zeljković |
| Page from | 141 |
| Page to | 144 |
The performance of implementation of investment activities by applying the model of influence
| Scientific Conference | International Working Conference ’’Total Quality Management – Advanced and Intelligent Approaches’’ |
|---|---|
| Publikacija | The 8th International Working Conference ’’Total Quality Management – Advanced and Intelligent Approaches’’, Belgrade, Serbia |
| Year | 2015 |
| Authors | Dejan Branković, Zdravko Milovanović, and Stevo Borojević |
Izbor putanje kretanja alata u procesu mašinske obrade tankostjenih aluminijumskih struktura
| Scientific Conference | JUPITER konferencija |
|---|---|
| Year | 2014 |
| Authors | Vid Jovišević, Stevo Borojević, and Bojan Marković |
| Page from | 3.7 |
| Page to | 3.14 |
Segment of CAPP – Automated modular fixture design in CAD environment
| Scientific Conference | 35th International Conference On Production Engineering |
|---|---|
| Year | 2013 |
| Authors | Stevo Borojević, Vid Jovišević, Velimir Todić, Mijodrag Milošević, and Dejan Lukić |
| Page from | 277 |
| Page to | 281 |
Tolerance transfer from CAD to CAM systems
| Scientific Conference | International Conference on Production Engineering |
|---|---|
| Year | 2013 |
| Authors | Đorđe Čiča, Simo Jokanović, Slaviša Todorović, and Stevo Borojević |
| Page from | 289 |
| Page to | 293 |
A novel method for material machinability evaluation
| Scientific Conference | International Conference of Sustainable Life in manufacturing - SLIM 2013 |
|---|---|
| Publikacija | Proceedings of 4th International Conference odf Sustainable Life in maufacturing SLIM 2013, ISBN 978-961-6536-67-7 |
| Year | 2013 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, and Stevo Borojević |
| Page from | 110 |
| Page to | 116 |
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers
| Scientific Conference | 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proceedings of 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology, ISBN 978-99938-39-46-0 |
| Year | 2013 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Page from | 283 |
| Page to | 291 |
Usaglašavanje jednoosovinskih traktroskih prikolica sa zahtjevima direktiva i standarda EU
| Scientific Conference | 10. međunarodna konferencija Održavanje i proizvodni inženjering,2012 |
|---|---|
| Publikacija | Zbornik radova 10.međunarodne konferencije Održavanje i proizvodni inženjering, KODIP 2012, ISBN 978-9940-527-24-2 |
| Year | 2012 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 203 |
| Page to | 209 |
Efekti primjene programskog sistema CATIA u procesu izrade programa za numeričke mašine
| Scientific Conference | 38. Jupiter konferencija, 2012 |
|---|---|
| Publikacija | Zbornik radova 38. konferencije sa međunarodnim učešćem JUPITER 2012, ISBN 978-86-7083-757-7 |
| Year | 2012 |
| Authors | Stevo Borojević, Vid Jovišević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 1 |
| Page to | 8 |
Identification of contact parameters of spindle‐holder‐tool assembly using artificial neural networks
| Scientific Conference | International scientific conference MMA 2012 – Advanced Production Technologies |
|---|---|
| Publikacija | Proc. of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, ISBN 978-9940-527-24-2 |
| Year | 2012 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, Branislav Sredanović, and Stevo Borojević |
| Page from | 57 |
| Page to | 61 |
Analiza obradivosti materijala pomoću aplikativnog računarskog programa
| Scientific Conference | 10. međunarodna konferencija Održavanje i proizvodni inženjering KODIP 2012 |
|---|---|
| Publikacija | Zbornik radova, KODIP 2012, ISBN978-9940-527-24-2 |
| Year | 2012 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Vid Jovišević |
| Page from | 81 |
| Page to | 88 |
Application of Simulation Techniques in The Development and Implementation of Flexible Manufacturing Systems
| Scientific Conference | International Scientific Conference on Industrial Systems |
|---|---|
| Year | 2011 |
| Authors | Velimir Todić, Dejan Lukić, Mijodrag Milošević, Stevo Borojević, and Jovan Vukman |
| Page from | 23 |
| Page to | 28 |
Optimizacija procesa proizvodnje primjenom programskog paketa Tecnomatix Plant Simulation
| Scientific Conference | 37. Jupiter konferencija,2011 |
|---|---|
| Publikacija | Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN 978-86-7083-724-9 |
| Year | 2011 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 8 |
| Page to | 15 |
Laboratories under requirements of directives and standards of European Union
| Scientific Conference | 10th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1 |
| Year | 2011 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 361 |
| Page to | 366 |
Modeling of cutting forces with artificial neural networks
| Scientific Conference | ICMEN 2011- International Conference on Manufacturing engineering |
|---|---|
| Publikacija | Proceedings of 4th International Conference on Manufacturing Engineering ICMEN 2011, ISBN 978-960-98780-4-3 |
| Year | 2011 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, Stevo Borojević, and Valentina Golubović Bugarski |
| Page from | 123 |
| Page to | 132 |
Modeling of dynamical behavior spindle‐holder‐tool assembly
| Scientific Conference | 34.International Conference on Production Engineering |
|---|---|
| Publikacija | 34th International Conference on Production Engineering, 2011, ISBN 978-86-6055-019-6 |
| Year | 2011 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, Branislav Sredanović, and Stevo Borojević |
| Page from | 117 |
| Page to | 120 |
Identification of face funcionality with program system for purpose of modular fixture design
| Scientific Conference | 34th International Conference on Production Engineering. Niš,2011 |
|---|---|
| Publikacija | Proceedings 34th International Conference on Production Engineering. Niš,2011, ISBN 978-86-6055-019-6 |
| Year | 2011 |
| Authors | Stevo Borojević, Vid Jovišević, Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Page from | 197 |
| Page to | 200 |
Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation
| Scientific Conference | 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1 |
| Year | 2011 |
| Authors | Stevo Borojević, Vid Jovišević, Gordana Globočki Lakić, Đorđe Čiča, Branislav Sredanović, and Marko Radisavljević |
| Page from | 419 |
| Page to | 426 |
Proizvodne strukture bazirane na simulaciji tipskih tehnoloških procesa
| Scientific Conference | JUPITER konferencija |
|---|---|
| Year | 2010 |
| Authors | Stevo Borojević and Vid Jovišević |
| Page from | 3.103 |
| Page to | 3.108 |
Algorithm for C1 continuous tool path: some experiences, problems and suggestions
| Scientific Conference | International Conference on Innovative Technologies - IN‐TECH |
|---|---|
| Publikacija | International Conference on Innovative Technologies, ISBN 978-80-904502-2-6 |
| Year | 2010 |
| Authors | Đorđe Čiča, Simo Jokanović, Stevo Borojević, and Branislav Sredanović |
| Page from | 160 |
| Page to | 164 |
Modeliranje vretenastih glodala primjenom CAD/CAM sistema
| Scientific Conference | Jupiter konferencija, |
|---|---|
| Year | 2010 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, and Stevo Borojević |
| Page from | 3.28 |
| Page to | 3.31 |
Vector based approach in definning of universal machinability
| Scientific Conference | International Conference on Innovative Technologies IN-TECH 2010 |
|---|---|
| Publikacija | International Conference on Innovative Technologies, ISBN 978-80-904502-2-6 |
| Year | 2010 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Simo Jokanović, Stevo Borojević, and Đorđe Čiča |
| Page from | 326 |
| Page to | 330 |
Development of the standard process plans for rolling bearings manufacturing
| Scientific Conference | International Conference on Manufacturing Systems – ICMaS |
|---|---|
| Year | 2009 |
| Authors | Velimir Todić, Dejan Lukić, Mijodrag Milošević, and Stevo Borojević |
| Page from | 295 |
| Page to | 300 |
Modeling, simulation and optimization of process planning
| Scientific Conference | International scientific conference MMA – Advanced Production Technologies, |
|---|---|
| Year | 2009 |
| Authors | Vid Jovišević, Stevo Borojević, and Simo Jokanović |
| Page from | 162 |
| Page to | 165 |
Modeliranje i simulacija proizvodnih procesa primjenom programskog sistema Tecnomatix Plant Simulation
| Scientific Conference | 33. savjetovanje proizvodnog mašinstva Srbije |
|---|---|
| Year | 2009 |
| Authors | Vid Jovišević, Simo Jokanović, and Stevo Borojević |
| Page from | 31 |
| Page to | 34 |
Projektovanje i proračun obimnog glodala primjenom savremenih programskih sistema
| Scientific Conference | International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009 |
|---|---|
| Publikacija | Zbornik radova 9. međunarodne konferencije o dostignućima elektrotehnike, mašinstva i informatike DEMI 2009, ISBN 978-99938-39-15-6 |
| Year | 2009 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, and Stevo Borojević |
| Page from | 255 |
| Page to | 260 |
Regulatorna tehnika Evropske Unije za CE označavanje tehničkih industrijskih proizvoda
| Scientific Conference | International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology, |
|---|---|
| Year | 2009 |
| Authors | Vid Jovišević and Stevo Borojević |
| Page from | 429 |
| Page to | 434 |
Harmonizacija liftova sa zahtjevima Evropskih direktiva i standarda
| Scientific Conference | International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Year | 2009 |
| Authors | Stevo Borojević, Vid Jovišević, and Milan Cvijić |
| Page from | 329 |
| Page to | 334 |
Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja
| Scientific Conference | 33. savjetovanje proizvodnog mašinstva, 2009 |
|---|---|
| Publikacija | 33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4 |
| Year | 2009 |
| Authors | Stevo Borojević, Branislav Sredanović, Gordana Globočki Lakić, and Đorđe Čiča |
| Page from | 31 |
| Page to | 34 |
Development of Application for Analysis of Machinability Index
| Scientific Conference | 11. International Conference on Tribology – Serbiatrib 2009 |
|---|---|
| Publikacija | Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4 |
| Year | 2009 |
| Authors | Gordana Globočki Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović |
| Page from | 251 |
| Page to | 254 |
Razvoj podsistema za izbor komponenti modularnih pribora
| Scientific Conference | International Conference on Production Engineering, |
|---|---|
| Year | 2008 |
| Authors | Stevo Borojević, Vid Jovišević, and Đorđe Vukelić |
| Page from | 131 |
| Page to | 134 |
Prilog razvoju modularnog projektovanja pribora na bazi klasifikacije komponenti za baziranje
| Scientific Conference | JUPITER konferencija |
|---|---|
| Year | 2008 |
| Authors | Stevo Borojević and Vid Jovišević |
| Page from | 5.12 |
| Page to | 5.17 |
Fabrička proizvodna kontrola u procesu CE označavanja industrijskih proizvoda
| Scientific Conference | JUPITER konferencija |
|---|---|
| Year | 2007 |
| Authors | Vid Jovišević and Stevo Borojević |
| Page from | 5.15 |
| Page to | 5.20 |
Regulatorna tehnika EU za CE označavanje tehničkih industrijskih proizvoda
| Scientific Conference | 8. Međunarodno savjetovanje o dostignućima u elektro i mašinskoj industriji DEMI 2007 |
|---|---|
| Year | 2007 |
| Authors | Vid Jovišević and Stevo Borojević |
Uputstvo za upotrebu toplovodnog kotla na pelet u skladu sa zahtjevima Evropskih direktiva
| Scientific Conference | Konferencija održavanja KOD 2007 sa međunarodnim učešćem |
|---|---|
| Year | 2007 |
| Authors | Vid Jovišević and Stevo Borojević |
Model projektovanja tehnoloških procesa za agregatne mašine
| Scientific Conference | International scientific conference MMA – Advanced Production Technologies, |
|---|---|
| Year | 2006 |
| Authors | Vid Jovišević and Stevo Borojević |
| Page from | 97 |
| Page to | 98 |
Other papers
Razvoj sistema za simultano projektovanje proizvoda i tehnoloških procesa
| Publisher | Univerzitet u Novom Sadu |
|---|---|
| Year | 2015 |
| Authors | Stevo Borojević |
| Page from | 1 |
| Page to | 260 |
Books and bibiliographies
OSNOVI TEORIJE ODRŽAVANJA Zbirka riješenih zadataka sa izvodima iz teorije
| Publisher | Univerzitet u Banjoj Luci Mašinski fakultet Banja Luka |
|---|---|
| ISBN | 978-99976-49-88-1 |
| Year | 2025 |
| Authors | Dejan Branković, Zdravko Milovanović, and Stevo Borojević |
| Type | udžbenik |
| Page count | 241 |
Simultano projektovanje proizvoda i tehnoloških procesa
| Publisher | Univerzitet u Banjaluci, Mašinski fakultet |
|---|---|
| ISBN | 978-99938-39-86-6 |
| Year | 2019 |
| Authors | Stevo Borojević |
| Type | naučna knjiga |
| Page count | 244 |
MONTAŽNE TEHNOLOGIJE
| Publisher | Mašinski fakultet, Univerziteta u Banjoj Luci |
|---|---|
| ISBN | *** |
| Year | 2011 |
| Authors | Vid Jovišević and Stevo Borojević |
| Type | ostale nastavne publikacije |
| Page count | 348 |
Projektovanje tehnoloških procesa - priručnik za vježbe
| Publisher | Univerzitet u Banjaluci, Mašinski fakultet Banjaluka |
|---|---|
| ISBN | 978-99938-39-33-0 |
| Year | 2011 |
| Authors | Radenko Zrilić and Stevo Borojević |
| Type | pomoćni udžbenik |
| Page count | 272 |
STANDARDIZACIJA I INDUSTRIJSKA LEGISLATIVA
| Publisher | Mašinski fakultet, Univerziteta u banjoj Luci |
|---|---|
| ISBN | *** |
| Year | 2010 |
| Authors | Vid Jovišević and Stevo Borojević |
| Type | ostale nastavne publikacije |
| Page count | 210 |
Projects
International
Uticaj koncepta Industrije 4.0 na transformaciji savremenog univerzitetskog inženjenjrskog obrazovanja u AP Vojvodini i Republici Srpskoj
| Project Number | 1256008 |
|---|---|
| Status | Not archived |
| Type of project | Međunarodni naučnoistraživački - Ostali |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants |
prof. dr Branislav Sredanovic |
| Business Partner | AUTONOMNA POKRAJINA VOJVODINA,POKRAJINSKI SEKRETARIJAT ZA VISOKO OBRAZOVANJE I NAUČNOISTRAŽIVAČKU DJELATNOST |
| Beginning of realization | 2022-03-01 |
| End of the project | 2023-10-17 |
| Project value | 48730.0 BAM |
Znanje za otporno društvo
| Project Number | 8300303 |
|---|---|
| Status | Archived |
| Type of project | Erazmus+ |
| Organizational unit | Arhitektonsko-građevinsko-geodetski fakultet |
| Head | prof. dr Gordana Broceta |
| Participants |
Jelena Pazin, ma prof. dr Sasa Cvoro mr Mladen Slijepcevic Marina Viskovic doc. dr Gordana Jakovljevic Slobodan Peulic, ma prof. dr Radenko Jotanovic prof. dr Biljana Antunovic prof. dr Mato Uljarevic Jelena Rozic, ma Aleksandra Regojevic prof. dr Brankica Milojevic Marina Latinovic Krndija, ma doc. dr Dejan Milinovic prof. dr Aleksandar Borkovic Stamenko Mijatovic prof. dr Miroslav Malinovic Radovan Vukomanovic, ma Vesna Savic Dragana Zeljic, ma Branka Kovacevic prof. dr Malina Cvoro prof. dr Stevo Borojevic |
| Business Partner | Evropska unija |
| Beginning of realization | 2016-10-01 |
| End of the project | 2019-10-01 |
| Project value | 208599.0 BAM |
Primjena metoda vještačke inteligencije pri mikroglodanju superlegura
| Project Number | 1256006 |
|---|---|
| Status | Not archived |
| Type of project | Međunarodni naučnoistraživački - Ostali |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Branislav Sredanovic |
| Participants |
prof. dr Djordje Cica prof. dr Stevo Borojevic |
| Business Partner | Ministarstvo za naučnotehnološki razvoj i visoko obarzovanje Republike Srpske |
| Beginning of realization | 2021-07-01 |
| End of the project | 2023-06-30 |
| Project value | 4000.0 BAM |
Razvoj kućišta gorivih ćelija čvrstog oksida od visokootpornih metalnih materijala
| Project Number | 1256010 |
|---|---|
| Status | Archived |
| Type of project | Međunarodni naučnoistraživački - Ostali |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants |
prof. dr Djordje Cica prof. dr Branislav Sredanovic |
| Business Partner | Ministarstvo civilnih poslova BiH |
| Beginning of realization | 2023-01-01 |
| End of the project | 2024-12-31 |
| Project value | 10000.0 BAM |
Commercial
PostBANOROB(BLiM) projekt
| Project Number | 8301009 |
|---|---|
| Status | Not archived |
| Type of project | Herd |
| Organizational unit | Rektorat |
| Head | prof. dr Simo Jokanovic |
| Participants |
prof. dr Gordana Globocki Lakic prof. dr Stevo Borojevic prof. dr Djordje Cica prof. dr Branislav Sredanovic |
| Business Partner | Vlada Norveške ,HERDICT program |
| Beginning of realization | 2015-01-01 |
| End of the project | 2016-12-31 |
| Project value | 74880.0 BAM |
Other
LEAN proizvodnja - Inovativni pristup učenju
| Project Number | 1256021 |
|---|---|
| Status | Archived |
| Type of project | Nacionalni naučnoistraživački |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Goran Janjic |
| Participants |
prof. dr Zorana Tanasic prof. dr Stevo Borojevic doc. Goran Jotic, ma mr Maja Vukovic |
| Business Partner | Ministarstvo za naučnotehnološki razvoj i visoko obarzovanje Republike Srpske |
| Beginning of realization | 2025-04-01 |
| End of the project | 2027-03-31 |
| Project value | 6000.0 BAM |
Unapređenje kapaciteta Centra za akreditovane laboratorije preko nabaveke opreme i akreditacije metode za ispitivanje tvrdoće materijala
| Project Number | 1256004 |
|---|---|
| Status | Not archived |
| Type of project | Nacionalni - ostali |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants | |
| Business Partner | RAZVOJNA AGENCIJA EDA, BANJA LUKA |
| Beginning of realization | 2021-04-01 |
| End of the project | 2023-10-17 |
| Project value | 84470.0 BAM |
Analiza mogućnosti izrade dijelova gorive ćelije čvrstog oksida od visokootpornih i teškoobradivih metalnih materijala
| Project Number | 1256016 |
|---|---|
| Status | Archived |
| Type of project | Nacionalni naučnoistraživački |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants |
prof. dr Branislav Sredanovic prof. dr Djordje Cica Gordana Tosic, ma |
| Business Partner | Ministarstvo za naučnotehnološki razvoj i visoko obarzovanje Republike Srpske |
| Beginning of realization | 2024-01-01 |
| End of the project | 2025-01-01 |
| Project value | 6000.0 BAM |
.jpg)
.jpg)