prof. dr Gordana Globocki Lakic
redovni profesor
Nastavnik - II-4
Faculty of Mechanical Engineering
051/433-034
Courses
Mašinski fakultet Šumarski fakultetBibliography
Journal papers
Energy Efficiency in Alloyed Steel Milling Process with Nano-Fluid Based Cooling and Lubrication
| DOI | ISSN 1848-6339 (Online) |
|---|---|
| Journal | Tehnički vjesnik |
| Year | 2025 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Dražan Kozak, and Goran Šimunović |
| Volumen | 32 |
| Number | 3 |
| Page from | 1085 |
| Page to | 1094 |
Tribological aspects of nano-particle fluid based cooling and lubrication in milling process
| DOI | https://doi.org/10.1088/1742-6596/2540/1/012020 |
|---|---|
| Journal | Journal of physics. Conference series (Print) |
| Year | 2023 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Pero Dugić, and Aleksandra Borković |
| Volumen | 2540 |
| Number | 1 |
| Page from | 012020 |
| Web address | https://iopscience.iop.org/article/10.1088/1742-6596/2540/1/012020/pdf |
Investigation of the permitted level of damage of vehicle safety glass
| DOI | 10.1088/1757-899X/1271/1/012020 |
|---|---|
| Journal | International Conference on Innovative Ideas in Science (Online) |
| Year | 2022 |
| Authors | Snežana Petković, Valentina Golubović Bugarski, Gordana Globočki Lakić, and Željko Đurić |
| Volumen | 1271 |
| Web address | https://iopscience.iop.org/article/10.1088/1757-899X/1271/1/012020 |
A Comparative Analysis of Milling Strategies of Complex Geometry Surfaces
| Journal | FME Transactions |
|---|---|
| Year | 2022 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Goran Jotić, and Stefan Gotovac |
| Volumen | 50 |
| Number | 4 |
| Page from | 623 |
| Page to | 634 |
| Web address | http://www.mas.bg.ac.rs/transactions |
The effect of corrosion on a structural integrity and vehicle safety“
| DOI | 10.24874/mvm.2021.47.03.05 |
|---|---|
| Journal | Mobility & Vehicle Mechanics |
| Year | 2021 |
| Authors | Valentina Golubović Bugarski, Snežana Petković, and Gordana Globočki Lakić |
| Volumen | 47 |
| Number | 3 |
| Page from | 49 |
| Page to | 62 |
The requirements for the design and construction of a gas cylinders aimed for transportation of a of compressed and liquefied gases
| DOI | 10.1088/1742-6596/1781/1/012036 |
|---|---|
| Journal | Journal of Physics: Conference Series |
| Year | 2021 |
| Authors | Valentina Golubović Bugarski, Mladen Todić, Snežana Petković, and Gordana Globočki Lakić |
| Volumen | 1781 |
| Page from | 1 |
| Page to | 10 |
| Web address | https://iopscience.iop.org/article/10.1088/1742-6596/1781/1/012036 |
Production of wood energy by chipping
| Journal | CONTEMPORARY MATERIALS |
|---|---|
| Year | 2019 |
| Authors | Dane Marčeta, Vladimir Petković, and Gordana Globočki Lakić |
| Volumen | x |
| Number | 2 |
| Page from | 159 |
| Page to | 166 |
Influence of workpiece hardness on tool wear in profile micro-milling of hardened tool steel
| DOI | 10.24874/ti.2018.40.01.09 |
|---|---|
| Journal | TRIBOLOGY IN INDUSTRY |
| Year | 2018 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Franci Pušavec |
| Volumen | 40 |
| Number | 1 |
| Page from | 100 |
| Page to | 107 |
| Web address | http://www.tribology.fink.rs/index.html |
Experimental study on micro-machinability of hardened tool steel in profile micro-milling
| DOI | 10.4028/www.scientific.net/SSP.261.85 |
|---|---|
| Journal | SOLID STATE PHENOMENA |
| Year | 2017 |
| Authors | Branislav Sredanović and Gordana Globočki Lakić |
| Volumen | 261 |
| Page from | 85 |
| Page to | 92 |
| Web address | https://www.scientific.net/SSP/Details |
Hard turning of bearing steel AISI 52100 with carbide tool and high pressure coolant supply
| DOI | 10.1007/s40430-017-0764-2 |
|---|---|
| Journal | JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
| Year | 2017 |
| Authors | Branislav Sredanović and Gordana Globočki Lakić |
| Volumen | 39 |
| Number | 11 |
| Page from | 4623 |
| Page to | 4632 |
| Web address | https://link.springer.com/journal/40430 |
Possibilities of application of high pressure jet assisted machining in hard turning with carbide tools
| DOI | 10.24874/ti.2017.39.02.11 |
|---|---|
| Journal | TRIBOLOGY IN INDUSTRY |
| Year | 2017 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Davorin Kramar, and Janez Kopač |
| Volumen | 39 |
| Number | 2 |
| Page from | 238 |
| Page to | 247 |
| Web address | http://www.tribology.fink.rs/journals/2017/2017-2/2017-2-11.html |
Analysis of Micro-Milling of Hardened Tool Steel
| DOI | 10.4028/www.scientific.net/KEM.686.57 |
|---|---|
| Journal | Key Engineering Materials |
| Year | 2016 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Volumen | 686 |
| Page from | 57 |
| Page to | 62 |
Tehnički pregledi vozila-statistička analiza podataka za period od 1.1.do 30.6.2016.
| Journal | Stručna institucija za tehničke preglede vozila Republike Srpske |
|---|---|
| Year | 2016 |
| Authors | Gordana Globočki Lakić and Valentina Golubović Bugarski |
| Volumen | 7 |
| Number | 13 |
| Page from | 48 |
| Page to | 62 |
Machinability of C45e Steel - Application of Minimum Quantity Lubrication and High Pressure Jet Assisted Machining Techniques
| DOI | 10.21278/TOF.40204 |
|---|---|
| Journal | TRANSACTIONS OF FAMENA |
| Year | 2016 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Davorin Kramar, and Janez Kopač |
| Volumen | 40 |
| Number | 2 |
| Page from | 45 |
| Page to | 58 |
High Pressure Jet Assisted Machining – Application in Turning
| Journal | Tribological Journal BULTRIB |
|---|---|
| Year | 2015 |
| Authors | Gordana Globočki Lakić and Branislav Sredanović |
| Volumen | 5 |
| Number | 5 |
| Page from | 111 |
| Page to | 118 |
Virtual modeling of assembly and working elements for horizontal hydraulic press
| Journal | ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering |
|---|---|
| Year | 2015 |
| Authors | Zdravko Božičković, Bogdan Marič, Dragoslav Dobraš, Gordana Globočki Lakić, and Đorđe Čiča |
| Volumen | XIII |
| Number | 3 |
| Page from | 165 |
| Page to | 168 |
| Web address | http://annals.fih.upt.ro/ANNALS-2015-3.html |
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers
| Journal | ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering |
|---|---|
| Year | 2014 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Volumen | 12 |
| Number | 2 |
| Page from | 127 |
| Page to | 132 |
Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach
| DOI | 10.1155/5263 |
|---|---|
| Journal | Advances in Mechanical Engineering |
| Year | 2013 |
| Authors | Đorđe Čiča, Branislav Sredanović, Gordana Globočki Lakić, and Davorin Kramar |
| Volumen | 2013 |
| Page from | 1 |
| Page to | 8 |
| Web address | http://dx.doi.org/10.1155/2013/798597 |
Značaj tehničkih pregleda za tehničku bezbjednost vozila i prevenciju saobraćajnih nezgoda
| Journal | Stručna institucija za tehničke preglede vozila Republike Srpske |
|---|---|
| Year | 2013 |
| Authors | Gordana Globočki Lakić and Valentina Golubović Bugarski |
| Number | 8 |
| Page from | 34 |
| Page to | 66 |
Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining
| Journal | STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING |
|---|---|
| Year | 2013 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, and Davorin Kramar |
| Volumen | 59 |
| Number | 12 |
| Page from | 748 |
| Page to | 754 |
| Web address | http://www.sv-jme.eu/home/ |
Statistička analiza podataka sa tehničkih pregleda vozila obavljenih u drugom polugodištu 2013. godine
| Journal | Stručna institucija za tehničke preglede vozila Republike Srpske |
|---|---|
| Year | 2013 |
| Authors | Gordana Globočki Lakić |
| Volumen | 4 |
| Number | 8 |
| Page from | 67 |
| Page to | 79 |
Experimental research using of MQL in metal cutting
| Journal | TRIBOLOGY IN INDUSTRY |
|---|---|
| Year | 2013 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić, and Janez Kopač |
| Volumen | 35 |
| Number | 4 |
| Page from | 276 |
| Page to | 258 |
| Web address | http://www.tribology.fink.rs/ |
Modelling of dynamical behavior of a spindle-holder-tool assembly
| Journal | STROJARSTVO |
|---|---|
| Year | 2012 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, and Branislav Sredanović |
| Volumen | 54 |
| Number | 2 |
| Page from | 135 |
| Page to | 144 |
Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks
| Journal | Journal of production engineering |
|---|---|
| Year | 2012 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, Branislav Sredanović, and Stevo Borojević |
| Volumen | 15 |
| Number | 2 |
| Page from | 37 |
| Page to | 40 |
Contribution to material machinability definition
| Journal | Journal of production engineering |
|---|---|
| Year | 2012 |
| Authors | Davorin Kramar, Branislav Sredanović, Gordana Globočki Lakić, and Janez Kopač |
| Volumen | 15 |
| Number | 2 |
| Page from | 27 |
| Page to | 32 |
| Web address | http://www.jpe.ftn.uns.ac.rs/ |
Development of mathematical model of universal material machinability
| Journal | JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION |
|---|---|
| Year | 2011 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Bogdan Nedić, Đorđe Čiča, and Dobrivoje Ćatić |
| Volumen | 17 |
| Number | 4 |
| Page from | 501 |
| Page to | 511 |
Criticality analysis of elements of automobile steering system
| Journal | JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION |
|---|---|
| Year | 2011 |
| Authors | Dobrivoje Ćatić, Gradimir Ivanović, Branislav Jeremić, and Gordana Globočki Lakić |
| Volumen | 17 |
| Number | 1 |
| Page from | 165 |
| Page to | 174 |
Development of Application for Analysis of Machinability Index
| Journal | TRIBOLOGY IN INDUSTRY |
|---|---|
| Year | 2009 |
| Authors | Gordana Globočki Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović |
| Volumen | 31 |
| Number | 1&2 |
| Page from | 57 |
| Page to | 60 |
Rapid investigation of materials machineability in models condition using tribometer
| Journal | TRIBOLOGY IN INDUSTRY |
|---|---|
| Year | 2006 |
| Authors | Gordana Globočki Lakić, Bogdan Nedić, Valentina Golubović Bugarski, and Đorđe Čiča |
| Volumen | 28 |
| Number | 3&4 |
| Page from | 9 |
| Page to | 15 |
Friction coefficient for Al alloys and tool materials contact pairs
| Journal | Tribology in industry |
|---|---|
| Year | 2005 |
| Authors | Bogdan Nedić and Gordana Globočki Lakić |
| Volumen | 27 |
| Number | 3&4 |
| Page from | 53 |
| Page to | 56 |
Conference papers
Modelling and cutting parameter optimisation of the Inconel 718 micromilling process
| Scientific Conference | 40th International Conference on Production Engineering Serbia ICPES 2025 |
|---|---|
| Publikacija | Proceedings of 40th International Conference on Production Engineering Serbia ICPES 2025 |
| Year | 2025 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Jelena Marković, Dejan Vujasin, and Davorin Kramar |
| Page from | 22 |
| Page to | 30 |
| Web address | http://spms.fink.rs/index.html |
An analysis of human hand-arm vibrations on the example of workers' exposure to vibrations in one production company
| Scientific Conference | 17 International Conference on th Accomplishments in Mechanical and Industrial Engineering - DEMI 2025 |
|---|---|
| Publikacija | Proceedings |
| Year | 2025 |
| Authors | Edin Ridžal, Valentina Golubović Bugarski, Biljana Vranješ, Gordana Globočki Lakić, and Mladen Todić |
| Page from | 609 |
| Page to | 618 |
Experimental analysis of nano‐fluid based cooling and lubrication influence on cutting forces in milling
| Scientific Conference | DEMI 2025/17th international conference on accomplishments in mechanical and industrial engineering, |
|---|---|
| DOI | ISBN 978-99976-11-08-6 |
| Publikacija | Proceedings of 17th international conference on accomplishments in mechanical and industrial engineering DEMI 2025 |
| Year | 2025 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Dražan Kozak, and Goran Šimunović |
| Page from | 115 |
| Page to | 123 |
ANALYSIS OF ACOUSTIC EMISSION GENERATED BY DYNAMIC DISTURBANCES IN THE MECHANICAL SYSTEM
| Scientific Conference | DEMI 2025/17th international conference on accomplishments in mechanical and industrial engineering, |
|---|---|
| DOI | ISBN 978-99976-11-08-6 |
| Publikacija | Proceedings: DEMI 2025/17th international conference on accomplishments in mechanical and industrial engineering, Banja Luka: Banja Luka: Faculty of Mechanical Engineering, 2025 |
| Year | 2025 |
| Authors | Valentina Golubović Bugarski, Snežana Petković, Gordana Globočki Lakić, Goran Jotić, and Gordana Tošić |
| Page from | 421 |
| Page to | 429 |
Application of tribological design on the example of concrete steel moulds
| Scientific Conference | BALKANTRIB’24, 11th INTERNATIONAL CONFERENCE ON TRIBOLOGY, 26-28 September 2024, |
|---|---|
| DOI | ISBN: 978-619-167-561-6 |
| Publikacija | BALKANTRIB’24, 11th INTERNATIONAL CONFERENCE ON TRIBOLOGY, 26-28 September 2024, Sofia, Bulgaria, Book of apstracts |
| Year | 2024 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Dražen Dragić, and Aleksandar Vencl |
| Page from | 30 |
| Page to | 33 |
TECHNICAL SYSTEM CONDITIONS MONITORING VIA THE LUBRICATING OIL ANALYSIS
| Scientific Conference | 18th International Conference on Tribology, SERBIATRIB ‘23 |
|---|---|
| Publikacija | Proceedings |
| Year | 2023 |
| Authors | Gordana Globočki Lakić, Sreten Perić, Mihael Bučko, Bogdan Nedić, Aleksandra Borković, and Nemanja Babić |
| Page from | 379 |
| Page to | 391 |
| Web address | http://www.serbiatrib.fink.rs/proceedings.html |
TRANSFORMING MANUFACTURING AND INDUSTRY 5.0
| Scientific Conference | 39TH INTERNATIONAL CONFERENCE ON PRODUCTION ENGINEERING OF SERBIA, ICPES 2023 , 26-27 OCTOBER 2023 |
|---|---|
| DOI | ISBN 978-86-6022-610-7 , |
| Publikacija | 39TH INTERNATIONAL CONFERENCE ON PRODUCTION ENGINEERING OF SERBIA 26-27 OCTOBER 2023, Proceedings |
| Year | 2023 |
| Authors | Bogdan Nedic and Gordana Globočki Lakić |
| Page from | 195 |
| Page to | 201 |
TR IBOLOGY AND INDUSTRY 4.0
| Scientific Conference | 18th International Conference on Tribology, SERBIATRIB ‘23 |
|---|---|
| Publikacija | 18th International Conference on Tribology – SERBIATRIB ‘23, 17 – 19 May 2023, Kragujevac, Serbia |
| Year | 2023 |
| Authors | Bogdan Nedić and Gordana Globočki Lakić |
| Page from | 102 |
| Page to | 112 |
TRIBOLOGICAL ASPECTS OF NANO-PARTICLE FLUID BASED COOLING AND LUBRICATION IN MILLING PROCESS
| Scientific Conference | 10th INTERNATIONAL CONFERENCE OF APPLIED SCIENCE - ICAS 2022 |
|---|---|
| Publikacija | ICAS 2022 CONFERENCE BOOK OF ABSTRACTS |
| Year | 2022 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Pero Dugić, Aleksandra Šinik, and Dragoslav Dobraš |
| Page from | 100 |
| Web address | https://www.researchgate.net/publication/361073268_ICAS_2022_BOOK_OF_ABSTRACTS |
INVESTIGATION OF THE PERMITTED LEVEL OF DAMAGE OF VEHICLES SAFETY GLASSES
| Scientific Conference | 9th International Congress “MVM 2022” |
|---|---|
| Publikacija | 9th International Congress “MVM 2022” 13-14 October 2022 Kragujevac, Serbia |
| Year | 2022 |
| Authors | Snežana Petković, Valentina Golubović Bugarski, Gordana Globočki Lakić, and Željko Đurić |
Comparative analysis of milling strategies of complex geometry surfaces
| Scientific Conference | 10th Internartional Conference on Tribology Balkantrib 20 |
|---|---|
| Year | 2021 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Goran Jotić, and Stefan Gotovac |
Specificity of engraving with fiber laser marking systems
| Scientific Conference | 38th International Conference on Production Engineering of Serbia |
|---|---|
| Year | 2021 |
| Authors | Bogdan Nedić, Radovan Radovanović, Stefan Perić, Gordana Globočki Lakić, and Stefan Đurić |
Analysis of energy efficienty of different modalities of turist transport,
| Scientific Conference | International Congress Motor Vehicles&Motors 2020 |
|---|---|
| Year | 2020 |
| Authors | Snežana Petković, Valentina Golubović Bugarski, Željko Đurić, and Gordana Globočki Lakić |
Komparativna analiza parametara bezbjednosti različitih modaliteta turističkog trsnsporta
| Scientific Conference | IX Međunarodna konferencija, Bezbjednost saobraćaja u lokalnoj zajednici |
|---|---|
| Year | 2020 |
| Authors | Snežana Petković, Valentina Golubović Bugarski, and Gordana Globočki Lakić |
The effect of corrosion on a structural integrity and vehicle safety
| Scientific Conference | International Congress Motor Vehicles&Motors 2020 |
|---|---|
| Year | 2020 |
| Authors | Valentina Golubović Bugarski, Snežana Petković, and Gordana Globočki Lakić |
Vozači kamiona, mala greška-velika nezgoda
| Scientific Conference | Agencija za bezbjednost saobraćaja Srbije, Savjetovanje sa međunarodnim mučešćem na temu saobraćajne nezgode |
|---|---|
| Year | 2019 |
| Authors | Snežana Petković, Gordana Globočki Lakić, Janez Kopač, and Franci Pušavec |
Generating and characteristic of surfaces in mechanical machining of micro-parts
| Scientific Conference | 16th International Conference on Tribology SERBIATRIB 19 |
|---|---|
| Publikacija | Proceedings of 6th International Conference on Tribology SERBIATRIB 19 |
| Year | 2019 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Damir Grguras, Davorin Kramar, and Franci Pusavec |
| Page from | 468 |
| Page to | 473 |
Production of wood energy by chipping
| Scientific Conference | Contemporary Materials |
|---|---|
| Year | 2019 |
| Authors | Dane Marčeta, Vladimir Petković, and Gordana Globočki Lakić |
The requirements for the design and construction of a gas cylinders aimed for transportation of a of compressed and liquefied gases
| Scientific Conference | International Conference on Applied Science, ICAS 2020 |
|---|---|
| Year | 2019 |
| Authors | Valentina Golubović Bugarski, Mladen Todić, Snežana Petković, and Gordana Globočki Lakić |
Drawning force of the osmometric full profiles
| Scientific Conference | International Conference on Applied Science, ICAS, 2019 |
|---|---|
| Year | 2019 |
| Authors | Mladen Todić, Tihomir Latinović, Valentina Golubović Bugarski, Ostoja Miletić, and Gordana Globočki Lakić |
Tehničko-bezbjednosni uslovi za učestvovanje motokultivatora u javnom saobraćaju
| Scientific Conference | Agencija za bezbjednost saobraćaja Srbije, Savjetovanje sa međunarodnim učešćem na temu saobraćajne nezgode |
|---|---|
| Year | 2019 |
| Authors | Snežana Petković, Gordana Globočki Lakić, and Valentina Golubović Bugarski |
Vibration comfort of the vehicle expressed by seat effective amplitude transmissibility
| Scientific Conference | International Congress Motor Vehicles & Motors 2018 |
|---|---|
| Year | 2018 |
| Authors | Valentina Golubović Bugarski, Snežana Petković, Željko Đurić, Goran Jotić, and Gordana Globočki Lakić |
Possibility of hardened steel machining by application of high pressure cooling and lubrication technique
| Scientific Conference | 37th International Conference on Production Engineering of Serbia |
|---|---|
| Year | 2018 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Živko Babić, Davorin Kramar, Janez Kopač, and Franci Pušavec |
Influence of cooling and lubrication technique on tool wear and surface roughness in hard turning
| Scientific Conference | 15th International Conference on Tribology SERBIATRIB‘17 |
|---|---|
| Publikacija | Proceedings of 15th International Conference on Tribology SERBIATRIB‘17 |
| Year | 2017 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Davorin Kramar, and Janez Kopač |
| Page from | 487 |
| Page to | 495 |
Study on the machinability characteristics of Inconel 718 super alloy during micro-milling
| Scientific Conference | 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017 |
|---|---|
| DOI | 10.1007/978-3-319-56430-2_28 |
| Publikacija | Proceedings of the 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017 |
| Year | 2017 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 375 |
| Page to | 385 |
| Web address | https://link.springer.com/chapter/10.1007/978-3-319-56430-2_28 |
Application of micro -cutting in machining of hard-to-machine materials
| Scientific Conference | IX international scientific conference "Contemporary materials 2016", 4-5. Septembre 2016, Banja Luka, |
|---|---|
| Publikacija | IX international scientific conference "Contemporary materials 2016", Banja Luka, 2016 |
| Year | 2016 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, and Janez Kopač |
Bezbjednost u saobraćaju
| Scientific Conference | Naučno-stručni skup Stručna institucija za tehničke preglede vozila Republike Srpske 2016 |
|---|---|
| Publikacija | Zbornik radova, Stručna institucija za tehničke preglede vozila Republike Srpske, ISBN 978-99976-673-1-1 |
| Year | 2016 |
| Authors | Janez Kopač and Gordana Globočki Lakić |
| Page from | 44 |
| Page to | 51 |
Modelling of Tool Wear in Turning Bearing Steel Using Carbide Tool and HPJAM Technique
| Scientific Conference | DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology |
|---|---|
| Publikacija | Proceedings, DEMI 2015, ISBN 978-99938-39-53-8 |
| Year | 2015 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 293 |
| Page to | 299 |
Analysis of Micro-Milling of Hardened Tool Steel
| Scientific Conference | 8th International Congress on Precision Machining ICPM 2015 |
|---|---|
| Publikacija | Proceedings of 8th International Congress on Precision Machining ICPM 2015, Novi Sad, Serbia, ISBN 978-86-7892-742-3 |
| Year | 2015 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 57 |
| Page to | 62 |
Specifics of The Design for CNC Plasma Cutting
| Scientific Conference | DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology, Banja Luka |
|---|---|
| Publikacija | Proceedings, 2015., ISBN 978-99938-39-53-8 |
| Year | 2015 |
| Authors | Bogdan Nedić, Marko Janković, Milan Erić, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 241 |
| Page to | 249 |
Korozija i strukturni integritet vozila
| Scientific Conference | Stručni skup Tehnički pregled vozila 2015 |
|---|---|
| Publikacija | Zbornik radova, Teslić 2015 |
| Year | 2015 |
| Authors | Valentina Golubović Bugarski, Gordana Globočki Lakić, and Snežana Petković |
| Page from | 50 |
| Page to | 64 |
New trends in cutting technologies: application of high pressure jet assisted machining, ISBN: 978-86-7083-857-4
| Scientific Conference | 14th International Conference on Tribology SERBIATRIB 2015 |
|---|---|
| Publikacija | Proceedings |
| Year | 2015 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 367 |
| Page to | 375 |
Sigurnosna stakla na vozilima
| Scientific Conference | Stručni skup Tehnički pregled vozila RS 2014 |
|---|---|
| Publikacija | Zbornik Radova, |
| Year | 2014 |
| Authors | Valentina Golubović Bugarski, Gordana Globočki Lakić, and Snežana Petković |
| Page from | 5 |
| Page to | 22 |
Modeliranje otpora rezanja pri struganju čelika C45E primjenom HPJAM tehnike hlađenja i podmazivanja
| Scientific Conference | 39. Jupiter konferencija |
|---|---|
| Publikacija | Zbornik 39. konferencije sa međunarodnim učešćem JUPITER 2014, ISBN 978-86-7083-838-3 |
| Year | 2014 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 130 |
| Page to | 135 |
The importance of modeling in the study of machinability
| Scientific Conference | 5th International Conference on Manufacturing Engineering - ICMEN |
|---|---|
| Publikacija | Proc. of 5th International Conference on Manufacturing Engineering ICMEN 2014, ISBN 978-960-98780-9-8 |
| Year | 2014 |
| Authors | Gordana Globočki Lakić and Branislav Sredanović |
| Page from | 1 |
| Page to | 12 |
Virtual modeling of assembly and working elements for horizontal hydraulic press
| Scientific Conference | II International Scientific Conference "COMETA 2014" |
|---|---|
| DOI | ISBN 978-99976-323-2-3 |
| Publikacija | Zbornik radova COMETa2014, ISBN 978-99976-623-1-6 |
| Year | 2014 |
| Authors | Zdravko Božičković, Bogdan Marić, Dragoslav Dobraš, Gordana Globočki Lakić, and Đorđe Čiča |
| Page from | 539 |
| Page to | 546 |
Quality of Plasma Cutting
| Scientific Conference | 13th International Conference on Tribology SERBIATRIB 13 |
|---|---|
| Publikacija | Proceedings SERBIATRIB 2013, ISBN: 978-86-86663-98-6 |
| Year | 2013 |
| Authors | Bogdan Nedić, Milan Janković, Miroslav Radovanović, and Gordana Globočki Lakić |
| Page from | 314 |
| Page to | 319 |
A novel method for material machinability evaluation
| Scientific Conference | International Conference of Sustainable Life in manufacturing - SLIM 2013 |
|---|---|
| Publikacija | Proceedings of 4th International Conference odf Sustainable Life in maufacturing SLIM 2013, ISBN 978-961-6536-67-7 |
| Year | 2013 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, and Stevo Borojević |
| Page from | 110 |
| Page to | 116 |
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers
| Scientific Conference | 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proceedings of 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology, ISBN 978-99938-39-46-0 |
| Year | 2013 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Page from | 283 |
| Page to | 291 |
Effects of using of MQL technique in metal cutting
| Scientific Conference | International Conference on Tribology - SERBIATRIB 2013 |
|---|---|
| Publikacija | Proc. of 13th International Conference on Tribology SERBIATRIB 2013, ISBN 978-86-86663-98-6 |
| Year | 2013 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić, and Janez Kopač |
| Page from | 276 |
| Page to | 285 |
Cutting Force Modeling in Hard Alloy Steel Turning
| Scientific Conference | International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proceedings of 11th International Conference DEMI 2013, ISBN 978-99938-39-46-0 |
| Year | 2013 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 389 |
| Page to | 396 |
An Investigation of Quality in Plasma Cutting
| Scientific Conference | DEMI 2013 - 11th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology |
|---|---|
| Publikacija | Proceedings DEMI 2013, ISBN 978-99938-39-46-0 |
| Year | 2013 |
| Authors | Bogdan Nedić, Milan Janković, Miroslav Radovanović, and Gordana Globočki Lakić |
| Page from | 275 |
| Page to | 282 |
Development of DamageCALC application for automatic calculation of damage indicator
| Scientific Conference | DIPRE - 3th International Conference on Diagnosis and Prediction in Mechanical Engineering System |
|---|---|
| Publikacija | Proc. of 3rd International Conference on Diagnosis and Prediction Mechanical Engineering System DIPRE 12 |
| Year | 2012 |
| Authors | Valentina Golubović Bugarski, Branislav Sredanović, and Gordana Globočki Lakić |
| Page from | 1 |
| Page to | 6 |
Identification of contact parameters of spindle‐holder‐tool assembly using artificial neural networks
| Scientific Conference | International scientific conference MMA 2012 – Advanced Production Technologies |
|---|---|
| Publikacija | Proc. of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, ISBN 978-9940-527-24-2 |
| Year | 2012 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, Branislav Sredanović, and Stevo Borojević |
| Page from | 57 |
| Page to | 61 |
Application of CAD/CAM systems for machining parts of aluminium profiles
| Scientific Conference | International scientific conference MMA 2012– Advanced Production Technologies |
|---|---|
| Publikacija | 11th International scientific conference MMA – Advanced Production Technologies, ISBN 978-86-7892-419-4 |
| Year | 2012 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Đorđe Čiča, and Aleksandar Milutinović |
| Page from | 227 |
| Page to | 231 |
Analiza obradivosti materijala pomoću aplikativnog računarskog programa
| Scientific Conference | 10. međunarodna konferencija Održavanje i proizvodni inženjering KODIP 2012 |
|---|---|
| Publikacija | Zbornik radova, KODIP 2012, ISBN978-9940-527-24-2 |
| Year | 2012 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Vid Jovišević |
| Page from | 81 |
| Page to | 88 |
Habanja alata i obradivost teškoobradivih materijala
| Scientific Conference | 38th JUPITER Conference with international participation |
|---|---|
| Publikacija | Zbornik radova, ISBN 978-86-7083-757-7 |
| Year | 2012 |
| Authors | Bogdan Nedić and Gordana Globočki Lakić |
| Page from | 3.59 |
| Page to | 3.64 |
Contribution to material machinability definition
| Scientific Conference | 3th International Conference of Sustainable Life in manufacturing - SLIM 2012 |
|---|---|
| Publikacija | Proc. of 3rd International Conference of Sustainable Life in Manufacturing SLIM 2012 |
| Year | 2012 |
| Authors | Davorin Kramar, Branislav Sredanović, Gordana Globočki Lakić, and Janez Kopač |
| Page from | 28 |
| Page to | 33 |
Usaglašavanje jednoosovinskih traktroskih prikolica sa zahtjevima direktiva i standarda EU
| Scientific Conference | 10. međunarodna konferencija Održavanje i proizvodni inženjering,2012 |
|---|---|
| Publikacija | Zbornik radova 10.međunarodne konferencije Održavanje i proizvodni inženjering, KODIP 2012, ISBN 978-9940-527-24-2 |
| Year | 2012 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 203 |
| Page to | 209 |
Efekti primjene programskog sistema CATIA u procesu izrade programa za numeričke mašine
| Scientific Conference | 38. Jupiter konferencija, 2012 |
|---|---|
| Publikacija | Zbornik radova 38. konferencije sa međunarodnim učešćem JUPITER 2012, ISBN 978-86-7083-757-7 |
| Year | 2012 |
| Authors | Stevo Borojević, Vid Jovišević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 1 |
| Page to | 8 |
Novi pristup definisanja univerzalne obradivosti pri obradi rezanjem
| Scientific Conference | Jupiter konferencija |
|---|---|
| Publikacija | Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN978-86-7083-724-9 |
| Year | 2011 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Bogdan Nedić, and Đorđe Čiča |
| Page from | 109 |
| Page to | 114 |
Scratch testing of Zn coating surfaces
| Scientific Conference | 34th INTERNATIONAL CONFERENCE ON PRODUCTION ENGINEERING,2011 |
|---|---|
| Publikacija | Proceedings: 34th INTERNATIONAL CONFERENCE ON PRODUCTION ENGINEERING, Niš, 2011., ISBN 978-86-6055-019-6 |
| Year | 2011 |
| Authors | Bogdan Nedić, Desimir Jovanović, and Gordana Globočki Lakić |
| Page from | 87 |
| Page to | 90 |
Optimizacija procesa proizvodnje primjenom programskog paketa Tecnomatix Plant Simulation
| Scientific Conference | 37. Jupiter konferencija,2011 |
|---|---|
| Publikacija | Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN 978-86-7083-724-9 |
| Year | 2011 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 8 |
| Page to | 15 |
Laboratories under requirements of directives and standards of European Union
| Scientific Conference | 10th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1 |
| Year | 2011 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 361 |
| Page to | 366 |
Development Model for Control Metal Cutting Process
| Scientific Conference | 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proceedings DEMI 2011, ISBN 978-99938-39-36-1 |
| Year | 2011 |
| Authors | Bogdan Nedić and Gordana Globočki Lakić |
| Page from | 309 |
| Page to | 315 |
Influence of Previous Machining on Characteristics of Galvanic Coatings
| Scientific Conference | International Conference on Tribology - SERBIATRIB 2011 |
|---|---|
| Publikacija | Proceedings: SERBIATRIB'11, Kragujevac, 2011, ISBN 978-86-86663-74-0 |
| Year | 2011 |
| Authors | Bogdan Nedić, Desimir Jovanović, and Gordana Globočki Lakić |
| Page from | 146 |
| Page to | 151 |
Modeling of cutting forces with artificial neural networks
| Scientific Conference | ICMEN 2011- International Conference on Manufacturing engineering |
|---|---|
| Publikacija | Proceedings of 4th International Conference on Manufacturing Engineering ICMEN 2011, ISBN 978-960-98780-4-3 |
| Year | 2011 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, Stevo Borojević, and Valentina Golubović Bugarski |
| Page from | 123 |
| Page to | 132 |
Modeling of dynamical behavior spindle‐holder‐tool assembly
| Scientific Conference | 34.International Conference on Production Engineering |
|---|---|
| Publikacija | 34th International Conference on Production Engineering, 2011, ISBN 978-86-6055-019-6 |
| Year | 2011 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, Branislav Sredanović, and Stevo Borojević |
| Page from | 117 |
| Page to | 120 |
Application of artificial intelligence in modeling of metal cutting process
| Scientific Conference | 10th International Scientific and Practical Conference: Research, Development and Application High Tehnologies in Industry |
|---|---|
| Publikacija | 10th International Scientific and Practical Conference „Research, Development and Application High Technologies in Industry“, 2011, ISBN 978-5-7422-3022-9 |
| Year | 2011 |
| Authors | Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Page from | 120 |
| Page to | 124 |
Identification of face funcionality with program system for purpose of modular fixture design
| Scientific Conference | 34th International Conference on Production Engineering. Niš,2011 |
|---|---|
| Publikacija | Proceedings 34th International Conference on Production Engineering. Niš,2011, ISBN 978-86-6055-019-6 |
| Year | 2011 |
| Authors | Stevo Borojević, Vid Jovišević, Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Page from | 197 |
| Page to | 200 |
Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation
| Scientific Conference | 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1 |
| Year | 2011 |
| Authors | Stevo Borojević, Vid Jovišević, Gordana Globočki Lakić, Đorđe Čiča, Branislav Sredanović, and Marko Radisavljević |
| Page from | 419 |
| Page to | 426 |
Vector based approach in definning of universal machinability
| Scientific Conference | International Conference on Innovative Technologies IN-TECH 2010 |
|---|---|
| Publikacija | International Conference on Innovative Technologies, ISBN 978-80-904502-2-6 |
| Year | 2010 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Simo Jokanović, Stevo Borojević, and Đorđe Čiča |
| Page from | 326 |
| Page to | 330 |
Modeliranje vretenastih glodala primjenom CAD/CAM sistema
| Scientific Conference | Jupiter konferencija, |
|---|---|
| Year | 2010 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, and Stevo Borojević |
| Page from | 3.28 |
| Page to | 3.31 |
Senzitivnost funkcije frekventnog odziva sistema glavno vreteno‐držač alata‐alat na promjene parametara veze
| Scientific Conference | Jupiter konferencija |
|---|---|
| Publikacija | Zbornik radova 36. Jupiter konferencije, 2010, ISBN 978-86-7083-696-9 |
| Year | 2010 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 3.22 |
| Page to | 3.27 |
Quality monitoring of production systems and processes in form of vector of power
| Scientific Conference | International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry |
|---|---|
| Publikacija | Proc. of 9th International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry, ISBN 978-5-7422-2557-7 |
| Year | 2010 |
| Authors | Branislav Sredanović and Gordana Globočki Lakić |
| Page from | 418 |
| Page to | 420 |
Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja
| Scientific Conference | 33. savjetovanje proizvodnog mašinstva, 2009 |
|---|---|
| Publikacija | 33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4 |
| Year | 2009 |
| Authors | Stevo Borojević, Branislav Sredanović, Gordana Globočki Lakić, and Đorđe Čiča |
| Page from | 31 |
| Page to | 34 |
Development of Application for Analysis of Machinability Index
| Scientific Conference | 11. International Conference on Tribology – Serbiatrib 2009 |
|---|---|
| Publikacija | Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4 |
| Year | 2009 |
| Authors | Gordana Globočki Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović |
| Page from | 251 |
| Page to | 254 |
Mjerenje ugaonih stepeni slobode metodom konačnih razlika
| Scientific Conference | International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009 , Banja Luka |
|---|---|
| Publikacija | Proceedings DEMI 2009, ISBN978-99938-39-15-6 |
| Year | 2009 |
| Authors | Đorđe Čiča, Milan Zeljković, Valentina Golubović Bugarski, and Gordana Globočki Lakić |
| Page from | 57 |
| Page to | 62 |
Projektovanje i proračun obimnog glodala primjenom savremenih programskih sistema
| Scientific Conference | International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009 |
|---|---|
| Publikacija | Zbornik radova 9. međunarodne konferencije o dostignućima elektrotehnike, mašinstva i informatike DEMI 2009, ISBN 978-99938-39-15-6 |
| Year | 2009 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, and Stevo Borojević |
| Page from | 255 |
| Page to | 260 |
Identifikacija parametara veze dinamičkih sistema korišćenjem funkcije frekventnog odziva, ISBN 978-86-7083-662-4
| Scientific Conference | 33. Savjetovanje proizvodnog mašinstva |
|---|---|
| Publikacija | Zbrornik radova |
| Year | 2009 |
| Authors | Đorđe Čiča, Milan Zeljković, Valentina Golubović Bugarski, and Gordana Globočki Lakić |
| Page from | 165 |
| Page to | 168 |
Some Results Experimental Test Friction and Wear Between Al Alloys and Tool Materials
| Scientific Conference | 10th International Conference on Tribology, SERBIATRIB 07 |
|---|---|
| Publikacija | Proceedings 10th International Conference on Tribology SERBIATRIB 07, ISBN 978-86-86663-13-9 |
| Year | 2007 |
| Authors | Bogdan Nedić and Gordana Globočki Lakić |
| Page from | 301 |
| Page to | 305 |
Primjena kružne interpolacije pri CNC obradi složenih površina: iskustva, problemi, moguća rješenja
| Scientific Conference | 33. Jupiter konferencija |
|---|---|
| Publikacija | Zbornik radova 33. JUPITER konferencija, ISBN 978-86-7083-592-4 |
| Year | 2007 |
| Authors | Đorđe Čiča, Simo Jokanović, and Gordana Globočki Lakić |
| Page from | 2.12 |
| Page to | 2.17 |
Vibration Measurement as a Machine Health Indicator
| Scientific Conference | 9th CIRP - International Workshop on Modeling of Machining Operations |
|---|---|
| Publikacija | Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations , ISBN 961-6536-06-0 |
| Year | 2006 |
| Authors | Valentina Golubović Bugarski, Drago Blagojević, and Gordana Globočki Lakić |
| Page from | 421 |
| Page to | 425 |
Mjerenje vibracija kao indikator ispravnosti mašina
| Scientific Conference | IRMES 06 - Istraživanje i razvoj mašinskih elemenata i sistema |
|---|---|
| Year | 2006 |
| Authors | Valentina Golubović Bugarski, Drago Blagojević, and Gordana Globočki Lakić |
Razvoj modela za ispitivanje obradivosti teškoobradivih materijala mjerenjem triboloških karakteristika
| Scientific Conference | 9. međunarodna naučno-stručna konferencija MMA |
|---|---|
| Publikacija | Zbornik radova MMA2006, ISBN 86-85211-96-4 |
| Year | 2006 |
| Authors | Gordana Globočki Lakić, Bogdan Nedić, Pantelija Dakić, and Đorđe Čiča |
| Page from | 63 |
| Page to | 65 |
Possibility of determination of material machinability over tribological parameters by use of tribometer “Block on disk”
| Scientific Conference | 9th CIRP International Workshop on modeling of machining opreations |
|---|---|
| Publikacija | Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations, 2006, ISBN 961-6536-06-0 |
| Year | 2006 |
| Authors | Gordana Globočki Lakić, Bogdan Nedić, Ivković Branko, Valentina Golubović Bugarski, and Đorđe Čiča |
| Page from | 307 |
| Page to | 312 |
Kompleksnost problema definisanja obradivosti materijala
| Scientific Conference | 31. Savjetovanje proizvodnog mašinstva |
|---|---|
| Publikacija | Zbornik Radova 31. savjetovanje proizvodnog mašinstva , Kragujevac 2006, ISBN 86-80581-92-5 |
| Year | 2006 |
| Authors | Gordana Globočki Lakić, Bogdan Nedić, Pantelija Dakić, Valentina Golubović Bugarski, and Đorđe Čiča |
| Page from | 57 |
| Page to | 64 |
Razvoj modela za ispitivanje obradivosti teškoobradivih metarijala mjerenjem triboloških karakteristika
| Scientific Conference | MMA 2006 - 9. Međunaroda naučno-stručna konferencija |
|---|---|
| Publikacija | Proceedings, MMA 2006, ISBN 86-85211-96-4 |
| Year | 2006 |
| Authors | Gordana Globočki Lakić, Bogdan Nedić, Pantelija Dakić, Đorđe Čiča, and Valentina Golubović Bugarski |
| Page from | 63 |
| Page to | 65 |
Matematičko modeliranje procesa rezanja
| Scientific Conference | 30. jubilarno savjetovanje proizvodnog mašinstva |
|---|---|
| Publikacija | Zbornik radova 30. jubilarno savjetovanje proizvodnog mašinstva, ISBN 86-7776-009-1 |
| Year | 2005 |
| Authors | Bogdan Nedić and Gordana Globočki Lakić |
| Page from | 353 |
| Page to | 358 |
Results of Measurement of Friction Coefficient Between Al Alloys and Tool materials
| Scientific Conference | 2nd International Conference on Manufacturing Engineering ICMEN |
|---|---|
| Publikacija | Proceedings |
| Year | 2005 |
| Authors | Bogdan Nedić and Gordana Globočki Lakić |
| Page from | 569 |
| Page to | 574 |
Neki rezultati ispitivanja obradivosti teškoobradivih legiranih čelika
| Scientific Conference | 9. jugoslovenska konferencija o tribologiji, YUTRIB 05 |
|---|---|
| Publikacija | Zbornik radova, 9. jugoslovenska konferencija o tribologiji YUTRIB 05 |
| Year | 2005 |
| Authors | Gordana Globočki Lakić, Bogdan Nedić, and Pantelija Dakić |
| Page from | 761 |
| Page to | 767 |
Application of "block on disc" tribometer in researching materials workability
| Scientific Conference | Balkantrib 05 - 5th Inernational Conference on Tribology |
|---|---|
| Publikacija | Proceedings of th 5th International conference on Tribology BALCANTRIB 05, ISBN 86-80581-78-X |
| Year | 2005 |
| Authors | Gordana Globočki Lakić, Bogdan Nedić, and Valentina Golubović Bugarski |
| Page from | 203 |
| Page to | 208 |
Rezultati mjerenja triboloških karakteristika Al legure na tribometru „Block on Disk“
| Scientific Conference | 8. međunarodno savjetovanje o dostignućima elektro i mašinske industrije DEMI 2005 |
|---|---|
| Publikacija | Zbornik radova DEMI 2005, ISBN 99938-39-08-6 |
| Year | 2005 |
| Authors | Gordana Globočki Lakić, Bogdan Nedić, and Pantelija Dakić |
| Page from | 217 |
| Page to | 224 |
Aktuelni trendovi razvoja i izučavanje mašina i uređaja u šumarstvu
| Scientific Conference | Naučni skup- Perspektive razvoja šumarstva |
|---|---|
| Publikacija | Zbornik radova |
| Year | 2003 |
| Authors | Drago Blagojević, Mladen Todić, and Gordana Globočki Lakić |
| Page from | 197 |
| Page to | 200 |
Aktuelni trendovi razvoja i izčavanja mašina i uređaja u šumarstvu
| Scientific Conference | Naučno-stručni skup Perspektive razvoja šumarstva, 2003 |
|---|---|
| Publikacija | Zbornik radova naučnog stručnog skupa Perspektive razvoja šumarstva,2003 |
| Year | 2003 |
| Authors | Drago Blagojević, Mladen Todić, and Gordana Globočki Lakić |
| Page from | 197 |
| Page to | 200 |
Modeliranje i simulacija procesa rezanja
| Scientific Conference | 6. međunarodno savjetovanje o dostignućima elektro i mašinske industrije DEMI 2003 |
|---|---|
| Publikacija | Zbornik radova DEMI 2003, ISBN 99938-623-8-X |
| Year | 2003 |
| Authors | Gordana Globočki Lakić |
| Page from | 107 |
| Page to | 114 |
Some results of tribological properties measurements of group heavy machining materials on tribometer "Block on Disk
| Scientific Conference | 8th International Tribology Conference ITC 03 |
|---|---|
| Publikacija | Proceedings of the 8th International Conference on Tribology ITC 03 |
| Year | 2003 |
| Authors | Gordana Globočki Lakić |
| Page from | 394 |
| Page to | 399 |
Some Results of Friction and Wear Tests in the HSS and Al Alloy Contact
| Scientific Conference | Conference Manufacturing Engineering ICMEN and Eureka Partnering Event |
|---|---|
| Publikacija | Proceedings |
| Year | 2002 |
| Authors | Branko Ivković, Gordana Globočki Lakić, and Pero Dugić |
Ispitivanje triboloških karakteristika SHP pri obradi aluminijuma simulacijom procesa rezanja na tribometru
| Scientific Conference | 5. međunarodno savjetovanje o dostignućima elektro i mašinske industrije DEMI 2002 |
|---|---|
| Publikacija | Zbornik radova DEMI 2002, ISBN 99938-623-2-0 |
| Year | 2002 |
| Authors | Gordana Globočki Lakić, Bogdan Nedić, and Branko Ivković |
| Page from | 134 |
| Page to | 140 |
Raspodjela napona u podnožju zupca za granične vrijednosti mjera i oblika zupčanika
| Scientific Conference | 4. međunarodno savjetovanje o dostignućima elektro i mašinske industrije DEMI 2001 |
|---|---|
| Publikacija | Zbornik radova DEMI 2001 |
| Year | 2001 |
| Authors | Milosav Đurđević and Gordana Globočki Lakić |
| Page from | 187 |
| Page to | 193 |
Doprinos optimizaciji procesa obrade unutrašnjeg navoja na automatima
| Scientific Conference | 3. međunarodno savjetovanje o dostignućima elektro i mašinske industrije DEMI 2000 |
|---|---|
| Publikacija | Zbornik radova DEMI 2000, ISBN 86-7392-012-4 |
| Year | 2000 |
| Authors | Pantelija Dakić, Gordana Globočki Lakić, and Vesna Dakić |
| Page from | 110 |
| Page to | 113 |
Obrada kompozitnih materijala laserom
| Scientific Conference | 3. međunarodno savjetovanje o dostignućima elektro i mašinske industrije DEMI 2000 |
|---|---|
| Publikacija | Zbornik radova DEMI 2000, ISBN 86-7392-012-4 |
| Year | 2000 |
| Authors | Pantelija Dakić, Gordana Globočki Lakić, and Vesna Dakić |
| Page from | 114 |
| Page to | 118 |
PRIMJENA REGRESIONOG METODA U OPTIMIZACIJI SPOLJAŠNJEG KRUŽNOG UZDUŽNOG BRUŠENJA
| Scientific Conference | VI INTERNATIONAL CONFERENCE ON FLEXIBLE TECHNOLOGIES |
|---|---|
| Publikacija | PROCEEDINGS VI INTERNATIONAL CONFERENCE ON FLEXIBLE TECHNOLOGIES |
| Year | 1997 |
| Authors | Gordana Globočki Lakić, Joko Stanić, and Živko Babić |
| Page from | 29 |
| Page to | 38 |
Optimizacija procesa spoljašnjeg kružnog uzdužnog brušenja prema troškovima obrade
| Scientific Conference | 26. međunarodno savjetovanje proizvodnog mašinstva Jugoslavije |
|---|---|
| Publikacija | Zbornik radova |
| Year | 1996 |
| Authors | Gordana Globočki Lakić and Joko Stanić |
| Page from | 143 |
| Page to | 150 |
Primjena regresionog metoda u optimizaciji obradnih procesa
| Scientific Conference | 22. međunarodna JUPITER konferencija |
|---|---|
| Publikacija | Zbornik radova |
| Year | 1996 |
| Authors | Gordana Globočki Lakić and Joko Stanić |
| Page from | 5.91 |
| Page to | 5.96 |
Određivanje potrebnog broja žarnih baza simulacijom procesa žarenja hladno valjane trake
| Scientific Conference | 25. savjetovanje proizvodnog mašinstva Jugoslavije |
|---|---|
| Year | 1994 |
| Authors | Nedeljko Sredić, Slavko Zrnić, and Gordana Globočki Lakić |
| Page from | 179 |
| Page to | 184 |
Ocjena pouzdanosti razvodnika paljenja RPS -16E2 na osnovu prispjelih reklamacija u garantnom roku
| Scientific Conference | 25. savjetovanje proizvodnog mašinstva Jugoslavije |
|---|---|
| Publikacija | Zbornik radova |
| Year | 1994 |
| Authors | Gordana Globočki Lakić, Slavko Zrnić, and Nedeljko Sredić |
| Page from | 809 |
| Page to | 815 |
Other papers
Naziv projekta: Akustička snaga mašina kao indikator za ocjenu zagađenja životne i radne sredine bukom, koordinator: prof. dr Valentina Golubović Bugarski
| Publisher | Mašinski fakultet |
|---|---|
| Year | 2023 |
| Authors | Valentina Golubović Bugarski and Gordana Globočki Lakić |
Projekat "Planiranje održivog turističkog transporta u lokalnoj zajednici", Naučno-istraživački projekat, Koordinator, prof. dr Snežana Petković, Ministarstvo nauke i tehnologije Republike Srpske
| Year | 2018 |
|---|---|
| Authors | Snežana Petković, Gordana Globočki Lakić, and ostali ostali |
Projekat: "Mogućnosti primjene mikro obrade u industriji alata", projekat bilateralne saradnje između BiH i Republike Slovenije (2016/2017), Ministarsvo civilnih poslova BiH, broj 19/6-020/964-1/16, koordinator projekta
| Year | 2016 |
|---|---|
| Authors | Gordana Globočki Lakić |
Coordinator CEEPUS network at University in Banja Luka, CIII-PL-0701-05-1617 - "Engineering as Communication Language in Europe", (2016/2017)
| Year | 2016 |
|---|---|
| Authors | Gordana Globočki Lakić |
Coordinator CEEPUS network at University in Banja Luka, CIII-RS-0507-06-1617, "Research, Development and Education in Precision Machining", (2012/2013), (2014/2015), (2016/2017)
| Year | 2016 |
|---|---|
| Authors | Gordana Globočki Lakić |
Coordinator CEEPUS network at University in Banja Luka, CIII-BG-0703-05-1617- "Modern Trends in Education and Research on Mechanical Systems-Bridging Reliability, Quality and Tribology", (2012/2013), (2014/2015), (2016/2017)
| Year | 2016 |
|---|---|
| Authors | Gordana Globočki Lakić |
Drilling stones, report
| Publisher | Faculty of Mechanical Engineering Ljubljana, Laboratory for metal cutting |
|---|---|
| Year | 2015 |
| Authors | Damir Grguraš, Gordana Globočki Lakić, and Janez Kopač |
Invention and innovation : from idea to patent, report
| Publisher | Faculty of Mechanical Engineering, Laboratory for metal cutting |
|---|---|
| Year | 2015 |
| Authors | Borut Likar, Gordana Globočki Lakić, Matija Hriberšek, David Muženič, and Janez Kopač |
Projekat: "Ispitivanje univerzalne obradivosti pri rezanju, dio 2-Teškoobradivi materijali, nastavak projekta bilateralne saradnje iz 2012/2013", projekat bilateralne saradnje između BiH i Republike Slovenije (2014/2015),Ministarstvo civilnih poslova BiH, broj 19/6-020/961-8/13, koordinator projekta
| Year | 2014 |
|---|---|
| Authors | Gordana Globočki Lakić |
Preliminary experimental research on micro-milling, report
| Publisher | Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems |
|---|---|
| Year | 2013 |
| Authors | Branislav Sredanović, Matija Hriberšek, Davorin Kramar, Gordana Globočki Lakić, and Janez Kopač |
| Page from | 1 |
| Page to | 13 |
Contribution to defining of universal machinabilty, report
| Publisher | Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems |
|---|---|
| Year | 2012 |
| Authors | Branislav Sredanović, Davorin Kramar, Gordana Globočki Lakić, and Janez Kopač |
| Page from | 1 |
| Page to | 26 |
Experimental investigation of turning of 100Cr6 steel with the SECO carbide inserts, report
| Publisher | Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems |
|---|---|
| Year | 2012 |
| Authors | Branislav Sredanović, Davorin Kramar, Gordana Globočki Lakić, and Janez Kopač |
| Page from | 1 |
| Page to | 10 |
Projekat: "Nabavka alatnog mikroskopa u Laboratoriji za tehnologiju obrade rezanjem i obradne sisteme", broj 19/6-020/968-12/12, koordinator projekta
| Year | 2012 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Modeliranje stanja alata (zavojnih burgija) primjenom vještačke inteligencije", (2012/2013), nosilac projekta Fakultet za proizvodnju i menadžment Trebinje, Univerzitet u Istočnom Sarajevu, projekat broj 19/6-020/961-172/12, saradnik na projektu
| Year | 2012 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "WBC Virtual Manufacturing Network-Fostering an Integration of the Knowledge Triangle", TEMPUS projekat 144684-TEMPUS-2008-RS-JPHES, saradnik na projektu
| Year | 2012 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Novi pristup u definisanju univerzalne obradivosti pri rezanju", projekat bilateralne saradnje između BiH i Republike Slovenije (2012/2013), Ministarstvo civilnih poslova BiH, broj 19/6-020/961-25/11, koordinator projekta
| Year | 2012 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Testiranje modela na bazi vještačkih neuronskih mreža za monitoring procesa obrade", naučno-istraživački projekat broj 19/6-030/3-1-136-1/10, koordinator projekta
| Year | 2010 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Uticaj primjene biodizela na maziva i ekološke i pogonske karakteristike motora", naučno-istraživački projekat broj 19/6-020/961-144/09, 2009-2011, saradnik na projektu
| Year | 2009 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Istraživanje humanih vibracija u svrhu procjene rizika na radnom mjestu i u radnoj sredini", naučno-istraživački projekat broj 19/6-020/961-56/09, koordinator projekta
| Year | 2009 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Savremena oprema za mjerenje sila pri obradi rezanjem-nabavka drugog dijela mjernog lanca", naučno-istraživački projekat broj 19/6-030/3-154-1/09, koordinator projekta
| Year | 2009 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Nabavka savremene opreme za mjerenje sila i momenata pri obradi rezanjem", naučno-istraživački projekat broj 06/6-030/3-238/08, koordinator projekta
| Year | 2008 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Dinamika procesa rezanja i njegova interakcija sa mehaničkom strukturom obradnog sistema", naučno-istraživački projekat broj 08-620-7/08, koordinator projekta
| Year | 2008 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Reinženjering Mašinskog fakulteta u skladu sa potrebama razvoja malih i srednjih preduzeća", projekat finansiran od strane GTZ Njemačka, 2006-2007, koordinator projekta
| Year | 2006 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Istraživanje konturnih kretanja kod CNC upravljane alatne glodalice", naučno-istraživački projekat broj 06/0-020/961-32/06, koordinator projekta
| Year | 2006 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Opremanje laboratorije za fleksibilne tehnološke sisteme PC upravljanom CNC mašinom-industrial training system, CEP projekat, WUS Austria, sardnik na projektu
| Year | 2004 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Opremanje laboratorije za fleksibilne tehnološke sisteme", CEP projekat broj 28/BL/03, WUS Austria, saradnik na projektu
| Year | 2003 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Uvođenje ekspertnih sistema u nastavni proces na Mašinskom fakultetu u Banjoj Luci u saradnji sa WUS Austria", SSP projekat broj 08/00, nastavak CEP projekta broj 14/98, saradnik na projektu
| Year | 2000 |
|---|---|
| Authors | Gordana Globočki Lakić |
Projekat: "Uvođenje ekspertnih sistema u nastavni proces na Mašinskom fakultetu u Banjoj Luci u saradnji sa WUS Austria", CEP projekat broj 14/98, 1998, saradnik na projektu
| Year | 1998 |
|---|---|
| Authors | Gordana Globočki Lakić |
Books and bibiliographies
Mehanizacija u šumarstvu
| Publisher | Univerzitet u Banjoj Luci, Šumarski fakultet |
|---|---|
| ISBN | 978-99976-49-74-4 |
| Year | 2025 |
| Authors | Gordana Globočki Lakić and Dane Marčeta |
| Type | osnovni udžbenik |
| Page count | 343 |
Alati i pribori u obradi rezanjem
| Publisher | Univerzitet u Banjoj Luci, Mašinski fakultet |
|---|---|
| ISBN | 978-99938-39-68-2 |
| Year | 2016 |
| Authors | Gordana Globočki Lakić and Branislav Sredanović |
| Type | osnovni udžbenik |
| Page count | 514 |
Metal Cutting-theory and applications
| Publisher | Faculty of Mechanical Engineering, University of Banja Luka and Faculty of Mechanical Engineering, University of Ljubljana |
|---|---|
| ISBN | 978-99938-39-49-1 |
| Year | 2014 |
| Authors | Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Type | naučna knjiga |
| Page count | 221 |
Obrada metala rezanjem-teorija, modeliranje i simulacija
| Publisher | Univerzitet u Banjoj Luci, Mašinski fakultet |
|---|---|
| ISBN | 978-99938-39-30-9 |
| Year | 2010 |
| Authors | Gordana Globočki Lakić |
| Type | naučna knjiga |
| Page count | 335 |
Projects
Commercial
PostBANOROB(BLiM) projekt
PostBANOROB projekat je direktan nastavak projekta BANOROB koji je uveo znanja i tehnologije visokog ranga, kao i savremenu laboratorijsku opremu na Univerzitetu u Banjoj Luci. Ovi rezultati sada omogućuju vrhunske obrazovne i istraživačkih aktivnosti u području proizvodnog mašinstva...
| Project Number | 8301009 |
|---|---|
| Status | Archived |
| Type of project | Herd |
| Organizational unit | Rektorat |
| Head | prof. dr Simo Jokanovic |
| Participants |
prof. dr Gordana Globocki Lakic prof. dr Stevo Borojevic prof. dr Djordje Cica prof. dr Branislav Sredanovic |
| Business Partner | Vlada Norveške ,HERDICT program |
| Beginning of realization | 2015-01-01 |
| End of the project | 2016-12-31 |
| Project value | 74880.0 BAM |
Other
Akustička snaga mašina kao indikator za ocjenu zagađenja životne i radne sredine bukom
Ovom Studijom definisaće se metodologija kojom se određuje akustička snaga i naučno će se izvršiti obrada rezultata eksperimentalnog istraživanja. Kao rezultat studije očekuje se završni rad drugog ciklusa akademskih studija. Originalni rezultati eksperimentalnog istraživanja i njihova analitička obrada biće objavljeni kroz naučni rad prezentovan na naučnom skupu ili publikovan u naučnom časopisu...
| Project Number | 1256015 |
|---|---|
| Status | Not archived |
| Type of project | Nacionalni naučnoistraživački |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Valentina Golubovic Bugarski |
| Participants |
prof. dr Gordana Globocki Lakic doc. Goran Jotic, ma Gordana Tosic, ma prof. dr Snezana Petkovic |
| Business Partner | Ministarstvo za naučnotehnološki razvoj i visoko obarzovanje Republike Srpske |
| Beginning of realization | 2023-12-01 |
| End of the project | 2024-12-31 |
| Project value | 3500.0 BAM |
.jpg)
.jpg)