prof. dr Branislav Sredanovic
vanredni profesor
Nastavnik - II-4
Faculty of Mechanical Engineering
051/433-069
Courses
Mašinski fakultet Prirodno-matematički fakultetBibliography
Journal papers
Multi-Objective Optimization of Milling Ti-6Al-4V Alloy for Improved Surface Integrity and Sustainability Performance
| Journal | Machines |
|---|---|
| Year | 2025 |
| Authors | Đorđe Čiča, Saša Tešić, Milisav Marković, Branislav Sredanović, Stevo Borojević, Milan Zeljković, Davorin Kramar, and Franci Pušavec |
| Volumen | 13 |
| Number | 3 |
| Web address | https://www.mdpi.com/2075-1702/13/3/221 |
Optimization of superalloy Inconel 718 micro‑milling process by combined Taguchi and multi‑criteria decision making method
| DOI | 10.1007/s40430-024-04996-7 |
|---|---|
| Journal | JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
| Year | 2024 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 46 |
| Page from | 1 |
| Page to | 14 |
| Web address | https://link.springer.com/article/10.1007/s40430-024-04996-7 |
Predictive modeling of turning operations under different cooling/lubricating conditions for sustainable manufacturing with machine learning techniques
| DOI | https://doi.org/10.1016/j.aci.2020.02.001 |
|---|---|
| Journal | Applied Computing and Informatics |
| Year | 2024 |
| Authors | Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Davorin Kramar |
| Volumen | 20 |
| Number | 1-2 |
| Page from | 162 |
| Page to | 180 |
| Web address | https://www.emerald.com/aci/article/20/1-2/162/1223238/Predictive-modeling-of-turning-operations-under |
ASSESSING THE PRECISION OF MACHINE TOOLS THROUGH VARIOUS MEASUREMENT SYSTEMS
| DOI | http://doi.org/10.24867/JPE-2023-02-018 18 Note: This |
|---|---|
| Journal | Journal of production engineering |
| Year | 2023 |
| Authors | Saša Tešić, Goran Jotić, Đorđe Čiča, Branislav Sredanović, Branko Štrbac, and Miloš Ranisavljev |
| Volumen | 26 |
| Number | 2 |
| Page from | 18 |
| Page to | 22 |
| Web address | https://jpe.ftn.uns.ac.rs/index.php/jpe |
Investigation of dynamic behaviour of one complex steel structure
| DOI | 10.1088/1742-6596/2540/1/012028 |
|---|---|
| Journal | Journal of physics. Conference series (Print) |
| Year | 2023 |
| Authors | Valentina Golubović Bugarski, Branislav Sredanović, Snježana Milovanović, Radovan Vukomanović, Mladen Todić, and Snežana Petković |
| Volumen | 2540 |
| Number | 1 |
| Page from | 012028 |
| Web address | https://iopscience.iop.org/article/10.1088/1742-6596/2540/1/012028/pdf |
Tribological aspects of nano-particle fluid based cooling and lubrication in milling process
| DOI | https://doi.org/10.1088/1742-6596/2540/1/012020 |
|---|---|
| Journal | Journal of physics. Conference series (Print) |
| Year | 2023 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Pero Dugić, and Aleksandra Borković |
| Volumen | 2540 |
| Number | 1 |
| Page from | 012020 |
| Web address | https://iopscience.iop.org/article/10.1088/1742-6596/2540/1/012020/pdf |
Energy efficiency of the Process Planning Design in the scope of Industry 4.0
| DOI | https://doi.org/10.1088/1742-6596/2540/1/012013 |
|---|---|
| Journal | Journal of physics. Conference series (Print) |
| Year | 2023 |
| Authors | Stevo Borojević, Branislav Sredanović, Mijodrag Milošević, Milenko Sekulić, and Sergej Janković |
| Volumen | 2540 |
| Page from | 012013 |
A Comparative Analysis of Milling Strategies of Complex Geometry Surfaces
| Journal | FME Transactions |
|---|---|
| Year | 2022 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Goran Jotić, and Stefan Gotovac |
| Volumen | 50 |
| Number | 4 |
| Page from | 623 |
| Page to | 634 |
| Web address | http://www.mas.bg.ac.rs/transactions |
Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters under MQL Condition
| DOI | https://doi.org/10.24874/ti.1301.05.22.07 |
|---|---|
| Journal | TRIBOLOGY IN INDUSTRY |
| Year | 2022 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 44 |
| Number | 3 |
| Page from | 498 |
| Page to | 507 |
| Web address | https://www.tribology.rs/journals/2022/2022-3/2022-3-11.html |
Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions
| DOI | https://doi.org/10.1007/s40684-021-00413-9 |
|---|---|
| Journal | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY |
| Year | 2022 |
| Authors | Saša Tešić, Đorđe Čiča, Stevo Borojević, Branislav Sredanović, Milan Zeljković, Davorin Kramar, and Franci Pusavec |
| Volumen | 9 |
| Number | November 2022 |
| Page from | 1427 |
| Page to | 1437 |
Experimental analysis and optimization of thin-walled tubular parts milling
| DOI | http://doi.org/10.24867/JPE-2022-02-006 |
|---|---|
| Journal | Journal of production engineering |
| Year | 2022 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 25 |
| Number | 4 |
| Page from | 6 |
| Page to | 12 |
| Web address | http://www.jpe.ftn.uns.ac.rs/papers/2022/no2/2-Sredanovic_JPE_25_No2.pdf |
Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska
| Journal | International Scentific Journal Industry 4.0 |
|---|---|
| Year | 2022 |
| Authors | Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić, and Jovica Ilić |
| Volumen | 6 |
| Page from | 240 |
| Page to | 243 |
| Web address | https://stumejournals.com/i4.htm |
Experimental investigation of tool deflection in micro-milling of fine-grained graphite
| Journal | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
|---|---|
| Year | 2022 |
| Authors | Đorđe Čiča, Branislav Sredanović, and Goran Miljušković |
| Volumen | 123 |
| Page from | 161 |
| Page to | 168 |
Capability of micro-milling in machining of difficult-to-cut materials
| Journal | International Scentific Journal Industry 4.0 |
|---|---|
| Year | 2021 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 6 |
| Number | 6 |
| Page from | 218 |
| Page to | 221 |
| Web address | https://stumejournals.com/journals/i4/2021/6/218 |
Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece
| Journal | ACTA TECHNICA CORVINIENSIS |
|---|---|
| Year | 2021 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 14 |
| Number | 4 |
| Page from | 29 |
| Page to | 33 |
| Web address | http://acta.fih.upt.ro/ACTA-2021-4.html |
Multiple performance characteristics optimization in end milling of thin-walled parts using desirability function
| Journal | TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING |
|---|---|
| Year | 2020 |
| Authors | Đorđe Čiča, Stevo Borojević, Goran Jotić, Branislav Sredanović, and Saša Tešić |
| Volumen | 44 |
| Number | 1 |
| Page from | 84 |
| Page to | 94 |
Optimisation of turning parameters for minimising specific cutting energy with use of different cooling/lubricating techniques
| Journal | International Journal of Machining and Machinability of Materials |
|---|---|
| Year | 2020 |
| Authors | Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Davorin Kramar |
| Volumen | 22 |
| Number | 2 |
| Page from | 153 |
| Page to | 164 |
Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel
| Journal | International Journal "Machines, Technologies, Materials" |
|---|---|
| Year | 2019 |
| Authors | Branislav Sredanović, Đorđe Čiča, Saša Tešić, and Davorin Kramar |
| Volumen | 13 |
| Number | 11 |
| Page from | 491 |
| Page to | 494 |
Influence of workpiece hardness on tool wear in profile micro-milling of hardened tool steel
| DOI | 10.24874/ti.2018.40.01.09 |
|---|---|
| Journal | TRIBOLOGY IN INDUSTRY |
| Year | 2018 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Franci Pušavec |
| Volumen | 40 |
| Number | 1 |
| Page from | 100 |
| Page to | 107 |
| Web address | http://www.tribology.fink.rs/index.html |
Possibilities of application of high pressure jet assisted machining in hard turning with carbide tools
| DOI | 10.24874/ti.2017.39.02.11 |
|---|---|
| Journal | TRIBOLOGY IN INDUSTRY |
| Year | 2017 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Davorin Kramar, and Janez Kopač |
| Volumen | 39 |
| Number | 2 |
| Page from | 238 |
| Page to | 247 |
| Web address | http://www.tribology.fink.rs/journals/2017/2017-2/2017-2-11.html |
Experimental study on micro-machinability of hardened tool steel in profile micro-milling
| DOI | 10.4028/www.scientific.net/SSP.261.85 |
|---|---|
| Journal | SOLID STATE PHENOMENA |
| Year | 2017 |
| Authors | Branislav Sredanović and Gordana Globočki Lakić |
| Volumen | 261 |
| Page from | 85 |
| Page to | 92 |
| Web address | https://www.scientific.net/SSP/Details |
Hard turning of bearing steel AISI 52100 with carbide tool and high pressure coolant supply
| DOI | 10.1007/s40430-017-0764-2 |
|---|---|
| Journal | JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
| Year | 2017 |
| Authors | Branislav Sredanović and Gordana Globočki Lakić |
| Volumen | 39 |
| Number | 11 |
| Page from | 4623 |
| Page to | 4632 |
| Web address | https://link.springer.com/journal/40430 |
Prediction of natural frequencies of the tool controlled mode using soft computing techniques
| Journal | International Scentific Journal Industry 4.0 |
|---|---|
| Year | 2017 |
| Authors | Đorđe Čiča, Milan Zeljkovic, Branislav Sredanović, and Stevo Borojević |
| Volumen | 1 |
| Number | 1 |
| Page from | 11 |
| Page to | 14 |
Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach
| Journal | International Journal "Machines, Technologies, Materials" |
|---|---|
| Year | 2017 |
| Authors | Đorđe Čiča, Branislav Sredanović, and Davorin Kramar |
| Volumen | 4 |
| Page from | 186 |
| Page to | 190 |
Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts
| Journal | Journal of production engineering |
|---|---|
| Year | 2017 |
| Authors | Đorđe Čiča, Zeljkovic Milan, Branislav Sredanović, and Sasa Tesic |
| Volumen | 20 |
| Number | 2 |
| Page from | 34 |
| Page to | 38 |
Machinability of C45e Steel - Application of Minimum Quantity Lubrication and High Pressure Jet Assisted Machining Techniques
| DOI | 10.21278/TOF.40204 |
|---|---|
| Journal | TRANSACTIONS OF FAMENA |
| Year | 2016 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Davorin Kramar, and Janez Kopač |
| Volumen | 40 |
| Number | 2 |
| Page from | 45 |
| Page to | 58 |
Design of fuzzy expert system for predicting of surface roughness in high-pressure jet assisted turning using bioinspired algorithms
| DOI | 10.1017/S0890060415000189 |
|---|---|
| Journal | AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFAC |
| Year | 2016 |
| Authors | Davorin Kramar, Đorđe Čiča, Branislav Sredanović, and Janez Kopac |
| Volumen | 30 |
| Number | 1 |
| Page from | 96 |
| Page to | 106 |
Analysis of Micro-Milling of Hardened Tool Steel
| DOI | 10.4028/www.scientific.net/KEM.686.57 |
|---|---|
| Journal | Key Engineering Materials |
| Year | 2016 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Volumen | 686 |
| Page from | 57 |
| Page to | 62 |
Identification of dynamical contact parameters for spindle-holder-tool assembly
| Journal | Journal of production engineering |
|---|---|
| Year | 2016 |
| Authors | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Volumen | 19 |
| Number | 1 |
| Page from | 57 |
| Page to | 60 |
Dynamic analysis of spindle-holder-tool assembly
| Journal | Machine Design |
|---|---|
| Year | 2016 |
| Authors | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Volumen | 8 |
| Number | 2 |
| Page from | 53 |
| Page to | 56 |
Comparative Study of ANN and ANFIS Prediction Models For Turning Process in Different Cooling and Lubricating Conditions
| DOI | 10.4271/2015-01-9082 |
|---|---|
| Journal | International Journal of Materials and Manufacturing |
| Year | 2015 |
| Authors | Branislav Sredanović and Đorđe Čiča |
| Volumen | 8 |
| Number | 2 |
| Page from | 586 |
| Page to | 591 |
Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study
| Journal | INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY |
|---|---|
| Year | 2015 |
| Authors | Đorđe Čiča, Branislav Sredanović, and Davorin Kramar |
| Volumen | 50 |
| Number | 1 |
| Page from | 49 |
| Page to | 64 |
High Pressure Jet Assisted Machining – Application in Turning
| Journal | Tribological Journal BULTRIB |
|---|---|
| Year | 2015 |
| Authors | Gordana Globočki Lakić and Branislav Sredanović |
| Volumen | 5 |
| Number | 5 |
| Page from | 111 |
| Page to | 118 |
Prediction of cutting zone temperature in high-pressure assisted turning using GA and PSO based ANN
| Journal | Journal of production engineering |
|---|---|
| Year | 2014 |
| Authors | Đorđe Čiča, Branislav Sredanović, and Davorin Kramar |
| Volumen | 17 |
| Number | 1 |
| Page from | 43 |
| Page to | 46 |
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers
| Journal | ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering |
|---|---|
| Year | 2014 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Volumen | 12 |
| Number | 2 |
| Page from | 127 |
| Page to | 132 |
Experimental research using of MQL in metal cutting
| Journal | TRIBOLOGY IN INDUSTRY |
|---|---|
| Year | 2013 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić, and Janez Kopač |
| Volumen | 35 |
| Number | 4 |
| Page from | 276 |
| Page to | 258 |
| Web address | http://www.tribology.fink.rs/ |
Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach
| DOI | 10.1155/5263 |
|---|---|
| Journal | Advances in Mechanical Engineering |
| Year | 2013 |
| Authors | Đorđe Čiča, Branislav Sredanović, Gordana Globočki Lakić, and Davorin Kramar |
| Volumen | 2013 |
| Page from | 1 |
| Page to | 8 |
| Web address | http://dx.doi.org/10.1155/2013/798597 |
Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining
| Journal | STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING |
|---|---|
| Year | 2013 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, and Davorin Kramar |
| Volumen | 59 |
| Number | 12 |
| Page from | 748 |
| Page to | 754 |
| Web address | http://www.sv-jme.eu/home/ |
Contribution to material machinability definition
| Journal | Journal of production engineering |
|---|---|
| Year | 2012 |
| Authors | Davorin Kramar, Branislav Sredanović, Gordana Globočki Lakić, and Janez Kopač |
| Volumen | 15 |
| Number | 2 |
| Page from | 27 |
| Page to | 32 |
| Web address | http://www.jpe.ftn.uns.ac.rs/ |
Modelling of dynamical behavior of a spindle-holder-tool assembly
| Journal | STROJARSTVO |
|---|---|
| Year | 2012 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, and Branislav Sredanović |
| Volumen | 54 |
| Number | 2 |
| Page from | 135 |
| Page to | 144 |
Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks
| Journal | Journal of production engineering |
|---|---|
| Year | 2012 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, Branislav Sredanović, and Stevo Borojević |
| Volumen | 15 |
| Number | 2 |
| Page from | 37 |
| Page to | 40 |
Development of mathematical model of universal material machinability
| Journal | JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION |
|---|---|
| Year | 2011 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Bogdan Nedić, Đorđe Čiča, and Dobrivoje Ćatić |
| Volumen | 17 |
| Number | 4 |
| Page from | 501 |
| Page to | 511 |
Development of Application for Analysis of Machinability Index
| Journal | TRIBOLOGY IN INDUSTRY |
|---|---|
| Year | 2009 |
| Authors | Gordana Globočki Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović |
| Volumen | 31 |
| Number | 1&2 |
| Page from | 57 |
| Page to | 60 |
Conference papers
Experimental analysis of nano‐fluid based cooling and lubrication influence on cutting forces in milling
| Scientific Conference | DEMI 2025/17th international conference on accomplishments in mechanical and industrial engineering, |
|---|---|
| DOI | ISBN 978-99976-11-08-6 |
| Publikacija | Proceedings of 17th international conference on accomplishments in mechanical and industrial engineering DEMI 2025 |
| Year | 2025 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Dražan Kozak, and Goran Šimunović |
| Page from | 115 |
| Page to | 123 |
Modelling and cutting parameter optimisation of the Inconel 718 micromilling process
| Scientific Conference | 40th International Conference on Production Engineering Serbia ICPES 2025 |
|---|---|
| Publikacija | Proceedings of 40th International Conference on Production Engineering Serbia ICPES 2025 |
| Year | 2025 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Jelena Marković, Dejan Vujasin, and Davorin Kramar |
| Page from | 22 |
| Page to | 30 |
| Web address | http://spms.fink.rs/index.html |
Energy consumption modelling and optimization in high efficiency milling
| Scientific Conference | 17th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2025 |
|---|---|
| DOI | ISBN 978-99976-11-08-6 |
| Publikacija | Proceedings of 17th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2025 |
| Year | 2025 |
| Authors | Branislav Sredanović, Đorđe Čiča, Jelena Marković, Dejan Vujasin, and Goran Mijušković |
| Page from | 123 |
| Page to | 129 |
| Web address | www.demi.mf.unibl.org |
Application of tribological design on the example of concrete steel moulds
| Scientific Conference | BALKANTRIB’24, 11th INTERNATIONAL CONFERENCE ON TRIBOLOGY, 26-28 September 2024, |
|---|---|
| DOI | ISBN: 978-619-167-561-6 |
| Publikacija | BALKANTRIB’24, 11th INTERNATIONAL CONFERENCE ON TRIBOLOGY, 26-28 September 2024, Sofia, Bulgaria, Book of apstracts |
| Year | 2024 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Dražen Dragić, and Aleksandar Vencl |
| Page from | 30 |
| Page to | 33 |
Obrazovanje inženjera proizvodnog mašinstva za Industriju 4.0 – izazovi, šanse, mogućnosti
| Scientific Conference | XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023 |
|---|---|
| Publikacija | Zbornik radova sa XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023 |
| Year | 2023 |
| Authors | Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević, and Branislav Sredanović |
| Page from | 222 |
| Page to | 225 |
Capability of micro-milling in machining of difficult-to-cut materials
| Scientific Conference | VI International Scientific Conference Industry 4.0 |
|---|---|
| Publikacija | Proceedings of VI International Scientific Conference Industry 4.0 |
| Year | 2023 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Page from | 220 |
| Page to | 223 |
Energy consumption analysis and parameter optimization in high-feed milling operation
| Scientific Conference | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023 |
|---|---|
| Publikacija | Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023 |
| Year | 2023 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, Dajana Jokić, and Davorin Kramar |
| Page from | 41 |
| Page to | 46 |
Investigation of dynamic behaviour of one complex steel structure
| Scientific Conference | International Conference on Applied Science, ICAS 2022 |
|---|---|
| Year | 2022 |
| Authors | Valentina Golubović Bugarski, Branislav Sredanović, Snježana Milovanović, Radovan Vukomanović, Snežana Petković, and Mladen Todić |
Education of production engineers for Industry 4.0
| Scientific Conference | 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022 |
|---|---|
| Publikacija | Proceedings of 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022 |
| Year | 2022 |
| Authors | Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević, and Branislav Sredanović |
| Page from | 91 |
| Page to | 96 |
TRIBOLOGICAL ASPECTS OF NANO-PARTICLE FLUID BASED COOLING AND LUBRICATION IN MILLING PROCESS
| Scientific Conference | 10th INTERNATIONAL CONFERENCE OF APPLIED SCIENCE - ICAS 2022 |
|---|---|
| Publikacija | ICAS 2022 CONFERENCE BOOK OF ABSTRACTS |
| Year | 2022 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Pero Dugić, Aleksandra Šinik, and Dragoslav Dobraš |
| Page from | 100 |
| Web address | https://www.researchgate.net/publication/361073268_ICAS_2022_BOOK_OF_ABSTRACTS |
Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska
| Scientific Conference | VII International Scientific Conference Industry 4 |
|---|---|
| Publikacija | Proceedings of VII International Scientific Conference Industry 4 |
| Year | 2022 |
| Authors | Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić, and Jovica Ilić |
| Page from | 277 |
| Page to | 280 |
Eksperimentalna analiza i optimizacija tvrdoće obrađene površine u kriogenim i MQL uslovima glodanja loptastim glodalom legure titanijuma Ti-6Al-4V
| Scientific Conference | 43. JUPITER konferencija |
|---|---|
| Year | 2022 |
| Authors | Saša Tešić, Milan Zeljković, Slobodan Tabaković, Đorđe Čiča, Stevo Borojević, and Branislav Sredanović |
| Page from | 3.73 |
| Page to | 3.78 |
Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja
| Scientific Conference | 43. JUPITER konferencija |
|---|---|
| Publikacija | Zbornik radova sa 43. JUPITER konferencije |
| Year | 2022 |
| Authors | Stevo Borojević, Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Milan Ćulum |
| Page from | 11 |
| Page to | 16 |
Application of analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece
| Scientific Conference | DEMI 2021 15th International Conference on Accomplishments in Mechanical and Industrial Engineering |
|---|---|
| Publikacija | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering |
| Year | 2021 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Page from | 71 |
| Page to | 77 |
| Web address | https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf |
Energy consumption model of the face milling
| Scientific Conference | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021 |
|---|---|
| Publikacija | Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021 |
| Year | 2021 |
| Authors | Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović, and Goran Jotić |
| Page from | 89 |
| Page to | 93 |
Comparative analysis of milling strategies of complex geometry surfaces
| Scientific Conference | 10th Internartional Conference on Tribology Balkantrib 20 |
|---|---|
| Year | 2021 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Goran Jotić, and Stefan Gotovac |
Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V
| Scientific Conference | 38th International Conference on Production Engineering Serbia ICPE 2021 |
|---|---|
| Publikacija | Proceedings of 38th International Conference on Production Engineering Serbia ICPE 2021 |
| Year | 2021 |
| Authors | Saša Tešić, Milan Zeljković, Đorđe Čiča, Stevo Borojević, and Branislav Sredanović |
| Page from | 96 |
| Page to | 101 |
Experimental analysis and optimization of thin-walled tubular parts milling
| Scientific Conference | 14th International Scientific Conference MMA 2018 |
|---|---|
| Publikacija | Proceeding of 14th International Scientific Conference MMA 2018 |
| Year | 2021 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Page from | 31 |
| Page to | 36 |
Energy consumption model of the face milling
| Scientific Conference | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2021, Banja Luka |
|---|---|
| Year | 2021 |
| Authors | Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović, and Goran Jotić |
| Page from | 89 |
| Page to | 93 |
| Web address | https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf |
Automatizacija projektovanja proizvoda primjenom CAD sistema nove generacije
| Scientific Conference | Jupiter konferencija |
|---|---|
| Year | 2020 |
| Authors | Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Saša Tešić |
| Page from | 2.20 |
| Page to | 2.25 |
Application of Taguchi method for identifying optimum specific energy consumption in CNC face milling
| Scientific Conference | 19th International Symposium INFOTEH-JAHORINA |
|---|---|
| Year | 2020 |
| Authors | Saša Tešić, Đorđe Čiča, Branislav Sredanović, and Bojan Knežević |
| Page from | 1 |
| Page to | 4 |
Investigation of the effects of the cutter path strategies on machining time and surface roughness in three-axis sculptured surface machining
| Scientific Conference | 14th International Conference on Accomplishments in Mechanical and Industrial Engineering |
|---|---|
| Year | 2019 |
| Authors | Đorđe Čiča, Sasa Tesic, Branislav Sredanović, and Stevo Borojević |
| Page from | 131 |
| Page to | 138 |
INVESTIGATION OF THE EFFECTS OF THE CUTTER PATH STRATEGIES ON MACHINING TIME AND SURFACE ROUGHNESS IN THREE-AXIS SCULPTURED SURFACE MACHINING
| Scientific Conference | 14th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2019, Banja Luka |
|---|---|
| Year | 2019 |
| Authors | Djordje Cica, Saša Tešić, Branislav Sredanović, and Stevo Borojević |
| Page from | 131 |
| Page to | 138 |
Generating and characteristic of surfaces in mechanical machining of micro-parts
| Scientific Conference | 16th International Conference on Tribology SERBIATRIB 19 |
|---|---|
| Publikacija | Proceedings of 6th International Conference on Tribology SERBIATRIB 19 |
| Year | 2019 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Damir Grguras, Davorin Kramar, and Franci Pusavec |
| Page from | 468 |
| Page to | 473 |
Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel
| Scientific Conference | IV International Scientific Conference Industry 4.0 |
|---|---|
| Publikacija | proceedings of IV International Scientific Conference Industry 4.0 |
| Year | 2019 |
| Authors | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Page from | 283 |
| Page to | 286 |
Modeling and simulation of production process for the tools of the press brake
| Scientific Conference | 13th International scientific conference MMA 2018 - Flexible technologies |
|---|---|
| Year | 2018 |
| Authors | Stevo Borojević, Vid Jovišević, Đorđe Čiča, and Branislav Sredanović |
| Page from | 179 |
| Page to | 182 |
ARTIFICIAL NEURAL NETWORKS MODEL FOR THE PREDICTION OF SURFACE ROUGHNESS IN MACHINING THIN WALLED PARTS
| Scientific Conference | MMA 2018 Flexible Technologies |
|---|---|
| Year | 2018 |
| Authors | Đorđe Čiča, Stevo Borojević, Branislav Sredanović, and Saša Tešić |
| Page from | 75 |
| Page to | 78 |
Possibility of hardened steel machining by application of high pressure cooling and lubrication technique
| Scientific Conference | 37th International Conference on Production Engineering of Serbia |
|---|---|
| Year | 2018 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Živko Babić, Davorin Kramar, Janez Kopač, and Franci Pušavec |
Artificial neural networks model for the prediction of surface roughness in machining thin walled parts
| Scientific Conference | 13th International scientific conference MMA 2018 - Flexible technologies |
|---|---|
| Year | 2018 |
| Authors | Đorđe Čiča, Stevo Borojević, Branislav Sredanović, and Sasa Tesic |
| Page from | 75 |
| Page to | 78 |
An Integration of Bio-inspired Algorithms and Fuzzy Logic for Tool Wear Estimation in Hard Turning
| Scientific Conference | 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017 |
|---|---|
| Year | 2017 |
| Authors | Đorđe Čiča, Branislav Sredanović, Stevo Borojević, and Davorin Kramar |
| Page from | 1 |
| Page to | 12 |
Study on the machinability characteristics of Inconel 718 super alloy during micro-milling
| Scientific Conference | 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017 |
|---|---|
| DOI | 10.1007/978-3-319-56430-2_28 |
| Publikacija | Proceedings of the 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017 |
| Year | 2017 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 375 |
| Page to | 385 |
| Web address | https://link.springer.com/chapter/10.1007/978-3-319-56430-2_28 |
Influence of cooling and lubrication technique on tool wear and surface roughness in hard turning
| Scientific Conference | 15th International Conference on Tribology SERBIATRIB‘17 |
|---|---|
| Publikacija | Proceedings of 15th International Conference on Tribology SERBIATRIB‘17 |
| Year | 2017 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Davorin Kramar, and Janez Kopač |
| Page from | 487 |
| Page to | 495 |
Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach
| Scientific Conference | INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY |
|---|---|
| Year | 2017 |
| Authors | Đorđe Čiča, Branislav Sredanović, and Davorin Kramar |
| Page from | 75 |
| Page to | 79 |
Application of micro -cutting in machining of hard-to-machine materials
| Scientific Conference | IX international scientific conference "Contemporary materials 2016", 4-5. Septembre 2016, Banja Luka, |
|---|---|
| Publikacija | IX international scientific conference "Contemporary materials 2016", Banja Luka, 2016 |
| Year | 2016 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, and Janez Kopač |
A predictive model of cutting forces in MQL turning usig genetic algorithm
| Scientific Conference | 3rd International scientific conference COMETa |
|---|---|
| Year | 2016 |
| Authors | Đorđe Čiča, Branislav Sredanović, and Davorin Kramar |
| Page from | 237 |
| Page to | 242 |
Prediction of natural frequencies of the tool controlled mode using soft computing techniques
| Scientific Conference | International Scientific Conference Industry 4.0 |
|---|---|
| Year | 2016 |
| Authors | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Page from | 22 |
| Page to | 25 |
Modelling of Tool Wear in Turning Bearing Steel Using Carbide Tool and HPJAM Technique
| Scientific Conference | DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology |
|---|---|
| Publikacija | Proceedings, DEMI 2015, ISBN 978-99938-39-53-8 |
| Year | 2015 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 293 |
| Page to | 299 |
Analysis of Micro-Milling of Hardened Tool Steel
| Scientific Conference | 8th International Congress on Precision Machining ICPM 2015 |
|---|---|
| Publikacija | Proceedings of 8th International Congress on Precision Machining ICPM 2015, Novi Sad, Serbia, ISBN 978-86-7892-742-3 |
| Year | 2015 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 57 |
| Page to | 62 |
Identification of dynamical contact parameters for spindle-holder-tool assembly
| Scientific Conference | International Scientific Conference MMA 2015 - Flexible Technologies |
|---|---|
| Year | 2015 |
| Authors | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Page from | 67 |
| Page to | 71 |
Specifics of The Design for CNC Plasma Cutting
| Scientific Conference | DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology, Banja Luka |
|---|---|
| Publikacija | Proceedings, 2015., ISBN 978-99938-39-53-8 |
| Year | 2015 |
| Authors | Bogdan Nedić, Marko Janković, Milan Erić, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 241 |
| Page to | 249 |
New trends in cutting technologies: application of high pressure jet assisted machining, ISBN: 978-86-7083-857-4
| Scientific Conference | 14th International Conference on Tribology SERBIATRIB 2015 |
|---|---|
| Publikacija | Proceedings |
| Year | 2015 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 367 |
| Page to | 375 |
The importance of modeling in the study of machinability
| Scientific Conference | 5th International Conference on Manufacturing Engineering - ICMEN |
|---|---|
| Publikacija | Proc. of 5th International Conference on Manufacturing Engineering ICMEN 2014, ISBN 978-960-98780-9-8 |
| Year | 2014 |
| Authors | Gordana Globočki Lakić and Branislav Sredanović |
| Page from | 1 |
| Page to | 12 |
Modeliranje otpora rezanja pri struganju čelika C45E primjenom HPJAM tehnike hlađenja i podmazivanja
| Scientific Conference | 39. Jupiter konferencija |
|---|---|
| Publikacija | Zbornik 39. konferencije sa međunarodnim učešćem JUPITER 2014, ISBN 978-86-7083-838-3 |
| Year | 2014 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 130 |
| Page to | 135 |
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers
| Scientific Conference | 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proceedings of 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology, ISBN 978-99938-39-46-0 |
| Year | 2013 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Page from | 283 |
| Page to | 291 |
Cutting Force Modeling in Hard Alloy Steel Turning
| Scientific Conference | International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proceedings of 11th International Conference DEMI 2013, ISBN 978-99938-39-46-0 |
| Year | 2013 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Davorin Kramar, and Janez Kopač |
| Page from | 389 |
| Page to | 396 |
A novel method for material machinability evaluation
| Scientific Conference | International Conference of Sustainable Life in manufacturing - SLIM 2013 |
|---|---|
| Publikacija | Proceedings of 4th International Conference odf Sustainable Life in maufacturing SLIM 2013, ISBN 978-961-6536-67-7 |
| Year | 2013 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, and Stevo Borojević |
| Page from | 110 |
| Page to | 116 |
Effects of using of MQL technique in metal cutting
| Scientific Conference | International Conference on Tribology - SERBIATRIB 2013 |
|---|---|
| Publikacija | Proc. of 13th International Conference on Tribology SERBIATRIB 2013, ISBN 978-86-86663-98-6 |
| Year | 2013 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić, and Janez Kopač |
| Page from | 276 |
| Page to | 285 |
Development of DamageCALC application for automatic calculation of damage indicator
| Scientific Conference | DIPRE - 3th International Conference on Diagnosis and Prediction in Mechanical Engineering System |
|---|---|
| Publikacija | Proc. of 3rd International Conference on Diagnosis and Prediction Mechanical Engineering System DIPRE 12 |
| Year | 2012 |
| Authors | Valentina Golubović Bugarski, Branislav Sredanović, and Gordana Globočki Lakić |
| Page from | 1 |
| Page to | 6 |
Identification of contact parameters of spindle‐holder‐tool assembly using artificial neural networks
| Scientific Conference | International scientific conference MMA 2012 – Advanced Production Technologies |
|---|---|
| Publikacija | Proc. of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, ISBN 978-9940-527-24-2 |
| Year | 2012 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, Branislav Sredanović, and Stevo Borojević |
| Page from | 57 |
| Page to | 61 |
Application of CAD/CAM systems for machining parts of aluminium profiles
| Scientific Conference | International scientific conference MMA 2012– Advanced Production Technologies |
|---|---|
| Publikacija | 11th International scientific conference MMA – Advanced Production Technologies, ISBN 978-86-7892-419-4 |
| Year | 2012 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Đorđe Čiča, and Aleksandar Milutinović |
| Page from | 227 |
| Page to | 231 |
Analiza obradivosti materijala pomoću aplikativnog računarskog programa
| Scientific Conference | 10. međunarodna konferencija Održavanje i proizvodni inženjering KODIP 2012 |
|---|---|
| Publikacija | Zbornik radova, KODIP 2012, ISBN978-9940-527-24-2 |
| Year | 2012 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Vid Jovišević |
| Page from | 81 |
| Page to | 88 |
Contribution to material machinability definition
| Scientific Conference | 3th International Conference of Sustainable Life in manufacturing - SLIM 2012 |
|---|---|
| Publikacija | Proc. of 3rd International Conference of Sustainable Life in Manufacturing SLIM 2012 |
| Year | 2012 |
| Authors | Davorin Kramar, Branislav Sredanović, Gordana Globočki Lakić, and Janez Kopač |
| Page from | 28 |
| Page to | 33 |
Usaglašavanje jednoosovinskih traktroskih prikolica sa zahtjevima direktiva i standarda EU
| Scientific Conference | 10. međunarodna konferencija Održavanje i proizvodni inženjering,2012 |
|---|---|
| Publikacija | Zbornik radova 10.međunarodne konferencije Održavanje i proizvodni inženjering, KODIP 2012, ISBN 978-9940-527-24-2 |
| Year | 2012 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 203 |
| Page to | 209 |
Efekti primjene programskog sistema CATIA u procesu izrade programa za numeričke mašine
| Scientific Conference | 38. Jupiter konferencija, 2012 |
|---|---|
| Publikacija | Zbornik radova 38. konferencije sa međunarodnim učešćem JUPITER 2012, ISBN 978-86-7083-757-7 |
| Year | 2012 |
| Authors | Stevo Borojević, Vid Jovišević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 1 |
| Page to | 8 |
Modeling of cutting forces with artificial neural networks
| Scientific Conference | ICMEN 2011- International Conference on Manufacturing engineering |
|---|---|
| Publikacija | Proceedings of 4th International Conference on Manufacturing Engineering ICMEN 2011, ISBN 978-960-98780-4-3 |
| Year | 2011 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, Stevo Borojević, and Valentina Golubović Bugarski |
| Page from | 123 |
| Page to | 132 |
Detection of structural damage location using frequency response function data
| Scientific Conference | DEMI 2011- 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Year | 2011 |
| Authors | Valentina Golubović Bugarski, Drago Blagojević, Đorđe Čiča, and Branislav Sredanović |
| Page from | 129 |
| Page to | 134 |
Modeling of dynamical behavior spindle‐holder‐tool assembly
| Scientific Conference | 34.International Conference on Production Engineering |
|---|---|
| Publikacija | 34th International Conference on Production Engineering, 2011, ISBN 978-86-6055-019-6 |
| Year | 2011 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, Branislav Sredanović, and Stevo Borojević |
| Page from | 117 |
| Page to | 120 |
Application of artificial intelligence in modeling of metal cutting process
| Scientific Conference | 10th International Scientific and Practical Conference: Research, Development and Application High Tehnologies in Industry |
|---|---|
| Publikacija | 10th International Scientific and Practical Conference „Research, Development and Application High Technologies in Industry“, 2011, ISBN 978-5-7422-3022-9 |
| Year | 2011 |
| Authors | Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Page from | 120 |
| Page to | 124 |
Identification of face funcionality with program system for purpose of modular fixture design
| Scientific Conference | 34th International Conference on Production Engineering. Niš,2011 |
|---|---|
| Publikacija | Proceedings 34th International Conference on Production Engineering. Niš,2011, ISBN 978-86-6055-019-6 |
| Year | 2011 |
| Authors | Stevo Borojević, Vid Jovišević, Gordana Globočki Lakić, Đorđe Čiča, and Branislav Sredanović |
| Page from | 197 |
| Page to | 200 |
Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation
| Scientific Conference | 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1 |
| Year | 2011 |
| Authors | Stevo Borojević, Vid Jovišević, Gordana Globočki Lakić, Đorđe Čiča, Branislav Sredanović, and Marko Radisavljević |
| Page from | 419 |
| Page to | 426 |
Novi pristup definisanja univerzalne obradivosti pri obradi rezanjem
| Scientific Conference | Jupiter konferencija |
|---|---|
| Publikacija | Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN978-86-7083-724-9 |
| Year | 2011 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Bogdan Nedić, and Đorđe Čiča |
| Page from | 109 |
| Page to | 114 |
Optimizacija procesa proizvodnje primjenom programskog paketa Tecnomatix Plant Simulation
| Scientific Conference | 37. Jupiter konferencija,2011 |
|---|---|
| Publikacija | Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN 978-86-7083-724-9 |
| Year | 2011 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 8 |
| Page to | 15 |
Laboratories under requirements of directives and standards of European Union
| Scientific Conference | 10th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1 |
| Year | 2011 |
| Authors | Vid Jovišević, Stevo Borojević, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 361 |
| Page to | 366 |
Modeliranje vretenastih glodala primjenom CAD/CAM sistema
| Scientific Conference | Jupiter konferencija, |
|---|---|
| Year | 2010 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, Đorđe Čiča, and Stevo Borojević |
| Page from | 3.28 |
| Page to | 3.31 |
Vector based approach in definning of universal machinability
| Scientific Conference | International Conference on Innovative Technologies IN-TECH 2010 |
|---|---|
| Publikacija | International Conference on Innovative Technologies, ISBN 978-80-904502-2-6 |
| Year | 2010 |
| Authors | Gordana Globočki Lakić, Branislav Sredanović, Simo Jokanović, Stevo Borojević, and Đorđe Čiča |
| Page from | 326 |
| Page to | 330 |
Quality monitoring of production systems and processes in form of vector of power
| Scientific Conference | International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry |
|---|---|
| Publikacija | Proc. of 9th International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry, ISBN 978-5-7422-2557-7 |
| Year | 2010 |
| Authors | Branislav Sredanović and Gordana Globočki Lakić |
| Page from | 418 |
| Page to | 420 |
Senzitivnost funkcije frekventnog odziva sistema glavno vreteno‐držač alata‐alat na promjene parametara veze
| Scientific Conference | Jupiter konferencija |
|---|---|
| Publikacija | Zbornik radova 36. Jupiter konferencije, 2010, ISBN 978-86-7083-696-9 |
| Year | 2010 |
| Authors | Đorđe Čiča, Milan Zeljković, Gordana Globočki Lakić, and Branislav Sredanović |
| Page from | 3.22 |
| Page to | 3.27 |
Algorithm for C1 continuous tool path: some experiences, problems and suggestions
| Scientific Conference | International Conference on Innovative Technologies - IN‐TECH |
|---|---|
| Publikacija | International Conference on Innovative Technologies, ISBN 978-80-904502-2-6 |
| Year | 2010 |
| Authors | Đorđe Čiča, Simo Jokanović, Stevo Borojević, and Branislav Sredanović |
| Page from | 160 |
| Page to | 164 |
Projektovanje i proračun obimnog glodala primjenom savremenih programskih sistema
| Scientific Conference | International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009 |
|---|---|
| Publikacija | Zbornik radova 9. međunarodne konferencije o dostignućima elektrotehnike, mašinstva i informatike DEMI 2009, ISBN 978-99938-39-15-6 |
| Year | 2009 |
| Authors | Branislav Sredanović, Gordana Globočki Lakić, and Stevo Borojević |
| Page from | 255 |
| Page to | 260 |
Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja
| Scientific Conference | 33. savjetovanje proizvodnog mašinstva, 2009 |
|---|---|
| Publikacija | 33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4 |
| Year | 2009 |
| Authors | Stevo Borojević, Branislav Sredanović, Gordana Globočki Lakić, and Đorđe Čiča |
| Page from | 31 |
| Page to | 34 |
Development of Application for Analysis of Machinability Index
| Scientific Conference | 11. International Conference on Tribology – Serbiatrib 2009 |
|---|---|
| Publikacija | Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4 |
| Year | 2009 |
| Authors | Gordana Globočki Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović |
| Page from | 251 |
| Page to | 254 |
Other papers
Preliminary experimental research on micro-milling, report
| Publisher | Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems |
|---|---|
| Year | 2013 |
| Authors | Branislav Sredanović, Matija Hriberšek, Davorin Kramar, Gordana Globočki Lakić, and Janez Kopač |
| Page from | 1 |
| Page to | 13 |
Contribution to defining of universal machinabilty, report
| Publisher | Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems |
|---|---|
| Year | 2012 |
| Authors | Branislav Sredanović, Davorin Kramar, Gordana Globočki Lakić, and Janez Kopač |
| Page from | 1 |
| Page to | 26 |
Experimental investigation of turning of 100Cr6 steel with the SECO carbide inserts, report
| Publisher | Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems |
|---|---|
| Year | 2012 |
| Authors | Branislav Sredanović, Davorin Kramar, Gordana Globočki Lakić, and Janez Kopač |
| Page from | 1 |
| Page to | 10 |
Books and bibiliographies
Modeliranje procesa obrade rezanjem - uticaj hlađenja i podmazivanja
| Publisher | Mašinski fakultet Unverziteta u Banjoj Luci |
|---|---|
| ISBN | 978-99976-11-02-4 |
| Year | 2023 |
| Authors | Branislav Sredanović |
| Type | naučna knjiga |
| Page count | 261 |
Soft computing in advanced cutting processes (Chapter in "Soft Computing in Smart Manufacturing: Solutions toward Industry 5.0", edited by T. Sibalija and J. P. Davim)
| Publisher | De Gruyter, Berlin |
|---|---|
| ISBN | 978-3-11-069317-1 |
| Year | 2021 |
| Authors | Branislav Sredanović, Đorđe Čiča, and Davorin Kramar |
| Type | ostale naučne publikacije |
| Page count | 71 |
| Web address | https://doi.org/10.1515/9783110693225-007 |
Alati i pribori u obradi rezanjem
| Publisher | Univerzitet u Banjoj Luci, Mašinski fakultet |
|---|---|
| ISBN | 978-99938-39-68-2 |
| Year | 2016 |
| Authors | Gordana Globočki Lakić and Branislav Sredanović |
| Type | osnovni udžbenik |
| Page count | 514 |
Praktično projektovanje pomoću računara u paketu SOLIDWORKS
| Publisher | Mašinski fakultet Univerziteta u Banjoj Luci |
|---|---|
| ISBN | xxx |
| Year | 2014 |
| Authors | Branislav Sredanović, Živko Babić, and Simo Jokanović |
| Type | ostale nastavne publikacije |
| Page count | 253 |
Projects
International
Uticaj koncepta Industrije 4.0 na transformaciji savremenog univerzitetskog inženjenjrskog obrazovanja u AP Vojvodini i Republici Srpskoj
Cilj projekta je istraživanje koje se odnosi na uticaj industrije 4.0 na univerzitetsko obrazovanje u području mašinskog inženjerstva.
| Project Number | 1256008 |
|---|---|
| Status | Archived |
| Type of project | Međunarodni naučnoistraživački - Ostali |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants |
prof. dr Branislav Sredanovic |
| Business Partner | AUTONOMNA POKRAJINA VOJVODINA,POKRAJINSKI SEKRETARIJAT ZA VISOKO OBRAZOVANJE I NAUČNOISTRAŽIVAČKU DJELATNOST |
| Beginning of realization | 2022-03-01 |
| End of the project | 2023-10-17 |
| Project value | 48730.0 BAM |
Razvoj kućišta gorivih ćelija čvrstog oksida od visokootpornih metalnih materijala
Opis Jedan od glavnih izazova sa kojima se suočava razvoj SOFC-a koji ometaju stabilan i pouzdan rad je degradacija performansi. Na performanse SOFC-a može značajno uticati nehomogena distribucija temperature, distribucija struje i potencijala, distribucija specifičnih gasovitih vrsta, uslovi protoka, itd. U cilju optimizacije rada SOFC-a, potrebno je projektovati odgovarajuće kućište ćelije za ispitivanje SOFC-a na odgovarajući način. Ovo bi trebalo da omogući ...
| Project Number | 1256010 |
|---|---|
| Status | Not archived |
| Type of project | Međunarodni naučnoistraživački - Ostali |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants |
prof. dr Branislav Sredanovic prof. dr Djordje Cica |
| Business Partner | Ministarstvo civilnih poslova BiH |
| Beginning of realization | 2023-01-01 |
| End of the project | 2024-12-31 |
| Project value | 10000.0 BAM |
Primjena metoda vještačke inteligencije pri mikroglodanju superlegura
Saradnja sa Mašinskim fakultetom u Ljubljani u oblasti razvoja ekspertnog inženjerskog sistema i pratećih baza podataka o procesu mikroobrade dijelova složenog geometrije i izrađenih od materijala sa posebnim svojstvima. Ciljevi projekta: 1. Definisanje okvira za razvoj ekspertnog sistema za upravljanje procesom mikroobrade dijelova složene geometrije. 2. Primjena mikroglodanja pri obradi složenih...
| Project Number | 1256006 |
|---|---|
| Status | Archived |
| Type of project | Međunarodni naučnoistraživački - Ostali |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Branislav Sredanovic |
| Participants |
prof. dr Djordje Cica prof. dr Stevo Borojevic |
| Business Partner | Ministarstvo za naučnotehnološki razvoj i visoko obarzovanje Republike Srpske |
| Beginning of realization | 2021-07-01 |
| End of the project | 2023-06-30 |
| Project value | 4000.0 BAM |
Commercial
PostBANOROB(BLiM) projekt
PostBANOROB projekat je direktan nastavak projekta BANOROB koji je uveo znanja i tehnologije visokog ranga, kao i savremenu laboratorijsku opremu na Univerzitetu u Banjoj Luci. Ovi rezultati sada omogućuju vrhunske obrazovne i istraživačkih aktivnosti u području proizvodnog mašinstva...
| Project Number | 8301009 |
|---|---|
| Status | Archived |
| Type of project | Herd |
| Organizational unit | Rektorat |
| Head | prof. dr Simo Jokanovic |
| Participants |
prof. dr Gordana Globocki Lakic prof. dr Stevo Borojevic prof. dr Djordje Cica prof. dr Branislav Sredanovic |
| Business Partner | Vlada Norveške ,HERDICT program |
| Beginning of realization | 2015-01-01 |
| End of the project | 2016-12-31 |
| Project value | 74880.0 BAM |
Other
Analiza mogućnosti izrade dijelova gorive ćelije čvrstog oksida od visokootpornih i teškoobradivih metalnih materijala
Svrha istraživanja je sagledavanje mogućnosti mašinske obrade visokootpornih metalnih materijala u cilju izrade pojedinih dijelova gorive ćelije čvrstog oksida. Poznato je da se pri radu gorive ćelije čvrstog oksida razvija visoka temperatura (oko 800-850 stepeni celzijusa). Da bi metalni materijali bili postojani na tim temparaturama, potrebno je da budu toplotno otporni, otporni na oksidaciju i električno provodljivi...
| Project Number | 1256016 |
|---|---|
| Status | Not archived |
| Type of project | Nacionalni naučnoistraživački |
| Organizational unit | Mašinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants |
prof. dr Branislav Sredanovic prof. dr Djordje Cica Gordana Tosic, ma |
| Business Partner | Ministarstvo za naučnotehnološki razvoj i visoko obarzovanje Republike Srpske |
| Beginning of realization | 2024-01-01 |
| End of the project | 2025-01-01 |
| Project value | 6000.0 BAM |
.jpg)
.jpg)